Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
6 Press STOP•CLEAR .once to end programming mode. . The total number of tracks programmed and total playing time appear on the display. Notes: – If the total playing time is more than “99:59” or if one of the programmed tracks has a number greater than 30, then “--:--” appears in the display instead of the total playing time. – During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. Playing the program 1 Press PLAY . to start program playback. . “PLAY PROGRAM” appears on the display. . The track number and elapsed playing time of the current track will appear on the display. • If you press REPEAT during program playback, the current track will be played repeatedly. . The REPEAT and PROGRAM flags will be displayed. 2 Press STOP•CLEAR .to stop program playback. Note: – If you press any of the CD DIRECT PLAY button, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM flag will also temporarily disappear from the display and then reappear when the playback for the selected disc ends. Reviewing the program Reviewing of the program is only possible in the stop mode. • Press PREV .or NEXT .repeatedly to review the programmed tracks. • Press STOP•CLEAR .to exit review mode. Erasing the program (in the stop mode) • Press STOP•CLEAR .on the system. ™ “PROGRAM CLEARED” will be displayed. Note: – The program will be erased when the system is disconnected from the power supply. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and the display will show “CLEARED” . Repeat (only on remote control) It will play the current track repeatedly. 1 Press REPEAT during CD playback. . “REPEAT TRACK” will be displayed. . The REPEAT flag appears on the display. • The track will now be played repeatedly until you press STOP•CLEAR .. 2 Press REPEAT again to resume normal playback. . The REPEAT flag disappears from the display. CD TUNER English Shuffle (only on remote control) It will play all the available discs and their tracks in random order. Shuffle may also be used when tracks are programmed. To shuffle all the discs and tracks 1 Press SHUFFLE. . “SHUFFLE” will be displayed. . The SHUFFLE flag, the disc and the track selected at random appear on the display. • The discs and the tracks will now be played in random order until you press STOP•CLEAR .. • If you press REPEAT during shuffling, the current track will be played repeatedly. . The REPEAT and SHUFFLE flags will be displayed. 2 Press SHUFFLE again to resume normal playback. . The SHUFFLE flag disappears from the display. CD TUNER TAPE AUX STA N DBY.ON CD 1 • 2 • 3 BAND TAPE 1 • 2 VIDEO n TIMER CLOCK PROGRAM RDS NEWS! DEMOTUNING s sss STOP•CLEARSEARCH PLAY PAUSE PREV NEXT PRESETss I SSTEREO DBB FM DUBBING NORM•FAST RECORD A. REPLAY MASTER VOLUME OPTIMAL JAZZ TECHNO ROCK DIGITAL SOUND CONTROL INCREDIBLE SURROUND DBBDSC Easy Set (only in Standby or Demonstration mode) EASY SET allows you to store all available radio stations in a particular band (FM, MW or LW) automatically. 1 Press and hold STANDBY•ON (on the system only)for 5 seconds; when the system is in standby or demonstration mode. . "EASY SET" will be displayed and followed by "TUNER". . EASY SET will start with the last active band. ™ All available radio stations with sufficient signal strength will be stored or until 40 presets are filled. 2 The system will search once again for the first available RDS station and to set the RDS time automatically. • When searching RDS station; . “SEARCH RDS STATION” will be displayed. If no RDS station is available, the program will exit automatically and "NO RDS STATION" will be displayed. . After a station is found, “EASY SET” will be displayed and followed by “TIME”. • When searching RDS time; . “SEARCH RDS TIME” will be displayed. . When RDS time is read, “RDS TIME” will be displayed. The current time is displayed for 2 seconds and will be stored automatically. Notes : – When EASY SET is used, all previously stored radio stations will be erased. – The last preset radio station or the first available RDS station will appear on the display when EASY SET is completed. – If RDS station does not transmit RDS time within 90 seconds, the program will exit automatically and the display will show “NO RDS TIME”. Tuning to radio stations 1 Press TUNER to select TUNER mode. . "TUNER" will be displayed. A few seconds later, the current frequency will be displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press TUNING .or .for more than one second, then release. . The display will show ‘SEARCH’ until a radio station with sufficient signal strength is found. • Repeat this procedure until the desired station is reached. • To tune to a weak station, briefly press TUNING .or .until the display shows the desired frequency and/or when the best reception has been obtained. TUNER English Storing Preset Stations You...