Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Celulares - ND5521 (1.5 mb)
Celulares - ND5521 (1.61 mb)
Facilidade de uso
yyIf this unit is BT mode and you connect your Android device (Version 4.1 or later) to this unit after connecting your Android device (Version 4.1 or later) to this unit by “LG Bluetooth Remote” app, the function is automatically switched to ANDROID mode. Then if you disconnect your Android device (Version 4.1 or later) from this unit, it is automatically switched to BT mode. yyThe Bluetooth connection of iPod touch/ iPhone/iPad is not activated while iPod/ iPhone/iPad is placed into the dock of this unit. yyThis unit does not support the multi-pairing. If this unit is already connected with other Bluetooth device, disconnect that device and then try again. yyIf you use “LG Bluetooth Remote” app for operation, there would be some differences between “LG Bluetooth Remote” app and the supplied remote control. Use the supplied remote control as necessary. yyDepending on the Bluetooth device, “LG Bluetooth Remote” app may not work. yy“LG Bluetooth Remote” app for Apple iOS is slightly different from that of Android OS. yyThe connection you’ve made may be disconnected if you select other application or change the setting of the connected device via “LG Bluetooth Remote” app. In such a case, please check the connection status. yyTo prevent a malfunction, you are recommended to connect only one device to this unit. ,,Note Other Operations Using Your Unit as an Alarm Clock 1. Make sure that you have set the clock correctly. (See “Setting the Clock” on page 9-10.) 2. Press and hold Alarm On/Off on the back panel. 3. The alarm sound sources blink. (FM (Tuner)/ IPOD) While each of sound sources blinks, select the one you want by pressing . If you select FM (Tuner) mode, you can select the station you preset by pressing / and then press to save. 4. “ON (Time)” setting is displayed. The hour setting blinks. Press / to select the hour and then press to save. 5. The minute setting blinks. Press / to select the minute and then press to save. 6. The volume setting blinks. Press / to change the volume and then press to save. ••Alarm function only works when this unit is turned off. ••You can check the setting status by pressing Alarm On/Off on the back panel two times. ••If you want to reset the alarm, repeat steps 2-6. ,,Note Activate and Deactivate the Alarm Timer Press Alarm On/Off repeatedly on the back panel to activate or deactivate the timer. --If the timer is activated, “” is displayed. --If the timer is deactivated, “” is not displayed. Stop Alarm Ring --When the alarm rings, press Alarm On/Off on the back panel or press 1. --The alarm stops but the alarm settings remain. ••If you don’t set clock on your iPod/iPhone/ iPad, the unit will not be synchronized for the clock with your iPod/iPhone/iPad. ••If you unplug the cord from an outlet, the alarm setting you set is not stored. ••After setting a clock function, you can set alarm function. ••If you do not press any button for 30 minutes after the alarm goes off, the alarm will shut off automatically. •• If you set the clock and alarm, you can check the time and alarm icon ““ by pressing Alarm On/Off although the unit is standby mode. ••If the time you set is up, the unit will be turned on automatically. ,,Note Snoozing The snoozing function wakes you up every 10 minutes if you tap anywhere on the control panel while the alarm activates. “ZZZ” appears and “” blinks. To cancel the snoozing function, press Alarm On/Off or 1. Resume Playback The unit memorizes the point where you pressed . Press to resume playback. Dimmer Press SLEEP once. The control panel will be darkened by half. To cancel it, press SLEEP repeatedly until the control panel get bright. Sleep Timer Setting While listening to music or radio, press SLEEP repeatedly to select delay time between 10 and 180 minutes. After delay time, the unit will turn off. (You can see the following order, 180 -> 150 -> 120 -> 90 -> 80 -> 70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10) To cancel the sleep function, press SLEEP repeatedly until the control panel get bright. ••You can check the remaining time before the unit turns off by pressing SLEEP. ••Sleep function will work after dimmer function. ,,Note Setting the Sound Mode This system has a number of pre-set sound fields. You can select a desired sound mode by using SOUND EFFECT. The displayed items for the equalizer may be different depending on sound sources and effects. On Display Description POP CLASSIC JAZZ ROCK This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock pop, jazz or classic concert. BYPASS You can enjoy the sound without equalizer effect. Maybe you need to reset the sound mode, after switching the input, sometimes even after the sound file is changed. ,,Note Turning off the Sound Temporarily Press @ to mute the sound. You can mute the sound in order, for example, to answer the telephone. And “MUTE” will appear in the control panel. To cancel mute function, press @ again or adjust volume level by pressin...