Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Otherwise: a Press Memory. Result: The PRGM is displayed for a few seconds. b Press Tuning Down and Up to assign a programme number between 1 and 15. c Press Memory to store the radio station. Result: PRGM is no longer displayed and the station is stored. 8 To store any other radio frequencies required, repeat Steps 3 to 7. The PROGRAM function can be used to assign a new station to an existing programme number. You can listen to a stored radio station as follows: 1 Switch the system on by pressing Standby/on. 2 Select the TUNER function by pressing TUNER . 3 Select the required frequency band by pressing TUNER (Band) on the remote control or TUNER (Band) again on the front panel. 4 Press button on the front panel of the unit, or the Tune/CD Mode button on the remote control until “PRESET” is displayed. / press on the front panel of the unit to select the desired station. or Select the desired station by pressing the station number stored, using the Tuning / 5 or button on the remote control. Result: The desired station is now received. 7 7 7 1 5 4 5 2,3 In Tuner Mode In manual tuning mode, you can use search a radio station. / button to manual During Tuner auto searching, press ing. button to stop auto search- In Preset tuning mode, you can use stored radio station. / button to search a you can use Program /Set button on the remote control to instead Memory button in step 7. Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial Testing the positions of the FM and AM(MW) aerials before fixing them permanently If reception from a specific FM radio station is poor, press Mono/ST. on the remote control to switch from stereo mode to mono. The quality of the sound will be improved. 16 GB 17 Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 23. Switch the system on by pressing the Standby/On button. Select the TAPE function by pressing TAPE. Open either cassette deck 1 or 2 by pushing and releasing the deck cover where Push Eject ( ) is written. Insert the pre-recorded cassette with the open edge of the tape facing downward. Close the deck by pushing on it until it clicks into place. Result: Depending on the deck selected, the 1 or 2 indication is displayed in front of the counter number. If you insert a cassette in both decks, the system selects the deck in which you inserted the second cassette. If you have inserted two cassettes, press Deck 1/2 on the front panel or directly the Deck 1/2 button on the remote control to select the cassette to be played. Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indication is displayed. To listen to... Press ... Side A TAPE ( ) once Deck 1 and Deck 2 Side B TAPE ( ) twice Deck 2 only Result: The cassette starts playing. When the cassette is stopped, select one of the following functions as required. To... Press ... Rewind the cassette Fast-forward the cassette When you have finished this function, press TAPE on the remote control or on the front panel to stop . You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. CD Synchro recording not function for MP3-CD Switch the system on by pressing Standby/On. Insert a blank cassette in Deck 2. Select the CD function by pressing CD on the front panel. Load a compact disc. Select the required disc. Select the required track and press CD Synchro or press CD Synchro directly to start recording at the beginning of the disc. Result: “REC” and “CD SYNC” are displayed and recording starts. To stop... Press ... Recording and playing the compact disc The direct recording mode enables you to start recording with any track on the compact disc. You can only record on cassettes in Deck 2. You do not need to adjust the volume, as it has no effect on the recording. Switch your system on by pressing Standby/On. Insert a blank cassette in Deck 2. Select the CD function by pressing CD on the front panel. Load the compact disc. Select the required disc. Select the required track on the compact disc and press on the front panel or on the remote control to set the compact disc player to Pause mode. Press the REC/Pause. Result: REC is displayed . Press the to start playing the track. Result: The track is recorded on the cassette. When you have finished recording, press TAPE on the remote control or on the front panel to stop recording. CD Synchro Record Feature Recording a Compact Disc Listening to a Cassette 1 2 3 4 5 6 7 8 1 123456 7 2 3 4 5 6 7 8 9 8 8 6 2,7 1 1 3,6,8 9 7 1 3 7 6 9 9 You can record a radio programme of your choice. You can only record on cassettes in Deck 2. You do not need to adjust the volume, as it has no effect on the recording. Switch the system on by pressing Standby/On. Insert a blank cassette in Deck 2. Sel...
Este manual também é adequado para os modelos :Stereo - MAXZS530TH (2.65 mb)