Assessments - , GPA:
(
)
)
Fabricante : Sony
Arquivo Tamanho: 601.23 kb
Arquivo Nome : 3095515111.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
Delete the partially-erased file. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual for how to deal with this problem. If the problem persists, contact your nearest Sony dealer. Continued . GB Others Are you using a supported USB device? .If you connect an unsupported USB device, the following problems may occur. See “Playable/Recordable USB devices” (page 32) for the supported device types. .The USB device is not recognized. .File or folder names are not displayed on this system. .Playback is not possible. .The sound skips. .There is noise. .A distorted sound is output. .Recording stops before it is finished. “Over Current” appears. .A problem has been detected with the level of electrical current from the (USB) port .. Turn off the system and remove the USB device from the (USB) port .. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. There is no sound. .The USB device is not connected correctly. Turn off the system and reconnect the USB device, then turn on the system and check if the USB MEMORY indicator . lights up. There is noise, skipping, or distorted sound. .Turn off the system and reconnect the USB device, then turn on the system. .The music data itself contains noise, or the sound is distorted. Noise may have entered during the recording process. Delete the file, and try recording again. The USB device cannot be connected into the (USB) port .. .The USB device is being connected backwards. Connect the USB device in the correct orientation. “Reading” is displayed for an extended time, or it takes a long time before playback starts. .The reading process can take a long time in the following cases. .There are many folders or files on the USB device. . The file structure is extremely complex. .The memory capacity is excessive. .The internal memory is fragmented. Thus, we recommend following these guidelines. .Total folders on USB device: 100 or less .Total files per folder: 100 or less Erroneous display .Send the music data to the USB device again, as the data stored in the USB device may have been corrupted. .The character codes that can be displayed by this system are numbers and alphabet only. Other characters are not displayed correctly. The USB device is not recognized. .Turn off the system and reconnect the USB device, then turn on the system. .Connect the supported USB device (page 32). .The USB device does not work properly. Refer to the USB device operation manual for how to deal with this problem. If the problem persists, contact your nearest Sony dealer. Play does not start. .Turn off the system and reconnect the USB device, then turn on the system. .Connect the supported USB device (page 32). .Press . (or USB .. on the unit) . to start play. GB Play does not start from the first track. .Set the play mode to Normal Play mode. MP file cannot be played back. .The MP3 file does not have the extension “.MP3”. .The data is not stored in MP3 format. .USB storage media formatted with file systems other than FAT16 or FAT32 are unsupported.* .If you use partitioned USB storage media, only MP3 files on the first partition can be played. .Playback is possible up to 8 levels. .The number of folders has exceeded 999. .The number of files has exceeded 999. .Files that are encrypted or protected by passwords, etc. cannot be played back. * This system supports FAT16 and FAT32, but some USB storage media may not support all of these FAT. For details, see the operation manual of each USB storage media or contact the manufacturer. Tuner Severe hum or noise, or stations cannot be received. (“TUNED” or “ST” flashes on the display.) .Connect the antenna properly. .Find a location and an orientation that provide good reception, and then set up the antenna again. .Keep the antennas away from the speaker cords, the power cord and the USB cable to avoid picking up noise. .Connect a commercially available external antenna. .Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. .Turn off nearby electrical equipment. To change the AM tuning interval The AM tuning interval is factory-preset to 9 kHz (or 10 kHz, for some areas; this function is not available on the Russian model). Use buttons on the unit to change the AM tuning interval. 1 Tune in any AM station, and then turn off the system. 2 While holding down TUNER/BAND ., press ./... All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. To improve tuner reception Turn off CD player power by using the CD power management function. By default, CD power is turned on. 1 Press FUNCTION . repeatedly to select the CD function, and then turn off the system. 2 After “STANDBY” stops flashing, press ./..on the unit while holding down ./CANCEL . on the unit. “CD POWER OFF” appears. With CD player power turned off, disc access time is increased. To turn on CD player ...
Este manual também é adequado para os modelos :- ()