Assessments - 3, GPA: 4
(
)
)
|
Fotos e especificações Sony MHC-EC68 |
por este dispositivo também tem outras instruções :
Facilidade de uso
repeatedly until “PGM” Using the timers Severe hum or noise. loaded a disc that cannot be played. If there is no improvement, move the speakers far away CD player section System: Compact disc and digital audio system from the TV. disappears while the player is stopped. The system offers two timer functions. If you use both .Move the system away from sources of noise. NO STEP : All of the programmed tracks have been Laser: Semiconductor laser (.=770 – 810 nm) timers, the Sleep Timer has priority. .Connect the system to a different wall socket. erased. Emission duration: continuous Cleaning the cabinet To delete the last track or file of the program Frequency response: 20 Hz – 20 kHz Use buttons on the remote to use the timer functions. .Install a noise filter (available separately) to the power OVER : You have reached the end of the disc while Press CLEAR . while the player is stopped. pressing .. during playback or pause. Clean this system with a soft cloth slightly moistened Signal-to-noise ratio: More than 90 dB cord. Dynamic range: More than 88 dB with a mild detergent solution. Do not use any type Sleep Timer: PROTECT : The following causes can be considered: Tape deck section (except for the UK model) To view program information, such as total of abrasive pad, scouring powder, or solvent, such as You can fall asleep to music. This function works even if The remote does not function. Recording system: 4-track 2-channel, stereo .The voltage selector may not be set to the correct track number of the program thinner, benzine, or alcohol. the clock is not set. .Remove any obstacles between the remote and the local power line voltage. Tuner section Press DISPLAY . repeatedly. Press SLEEP . repeatedly. If you select “AUTO,” the remote sensor . on the unit, and position the unit FM stereo, FM/AM superheterodyne tuner .Speaker cords may be short-circuited. To prevent a tape from being accidentally Antenna: system automatically turns off after the current disc or away from fluorescent lights. .The ventilation holes may be blocked. recorded over (Except for the UK model) FM lead antenna tape stops or in 100 minutes. .Point the remote at the system’s sensor. AM loop antenna See “If “PROTECT” appears on the display” to check Break off the cassette’s overwrite protection tab from side Presetting radio stations .Move the remote closer to the system. what to do if this message appears. A or B as illustrated. If the tape deck is still playing or recording at the set FM tuner section: Tuning range: time, the system turns off after the tape deck stops. 87.5 – 108.0 MHz (50 kHz step) PUSH SELECT : You tried to set the clock or timer during You can preset your favourite radio stations and tune Intermediate frequency: 10.7 MHz Play Timer: CD/MP3 player timer operation. them in instantly by selecting the corresponding preset Break off the cassette AM tuner section: You can wake up to CD or tuner at a preset time. PUSH STOP : You pressed PLAY MODE . during Tuning range number. tab The sound skips, or the disc will not play. playback. Australian, Pan-American models: Make sure you have set the clock. 1 Tune in the desired station (See “Listening to the .Wipe the disc clean, and replace it. 530 – 1,710 kHz (with 10 kHz tuning interval) READING : The system is reading information from the 531 – 1,710 kHz (with 9 kHz tuning interval) radio”). 1 Prepare the sound source. .Move the system to a location away from vibration (for disc. Some buttons are not available. European and Russian models: Press VOLUME +/– (or turn VOLUME on the unit) example, on top of a stable stand). 531 – 1,602 kHz (with 9 kHz tuning interval) Other models: 2 Press TUNER MEMORY .. SET CLOCK : You tried to select the timer when the clock Preset number . to adjust the volume. .Move the speakers away from the system, or place them is not set. To later reuse the tape for recording, cover the broken tab 530 – 1,610 kHz (with 10 kHz tuning interval) To start from a specific CD track or MP3 file, create on separate stands. At high volume, speaker vibration SET TIMER : You tried to select the timer when the Play with adhesive tape. 531 – 1,602 kHz (with 9 kHz tuning interval) your own CD program. may cause the sound to skip. Intermediate frequency: 450 kHz Timer is not set. About a tape longer than 90 minutes (Except Speaker 2 Press CLOCK/TIMER SET .. TIME NG : The Play Timer start and end times are set to Play does not start from the first track. the same time. for the UK model) SS-EC78/SS-EC78S for MHC-EC78 3 Press ./.. repeatedly to select “PLAY SET,” .Return to Normal Play by pressing PLAY MODE . The use of the tape with more than 90 minutes of play Speaker system: 3 way 3 Drivers speaker system, Bass reflex Speaker unit then press ENTER .. repeatedly until both “PGM” and “SHUF” disappear. time is not recommended except for long, continuous 3 Press +/– (or TUNING +/– on the unit) . repeatedly Precautions Subwoofer: 13 cm, cone type recording or playback. Woofer:...
Este manual também é adequado para os modelos :Stereo - MHC-EC78 (490.3 kb)