Assessments - 2, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Radio: Tune in the preset station you want (see “Step 3: Presetting radio stations”). 2 Turn VOLUME to adjust the volume. 3 Press t/CLOCK SET. “SET” appears and “DAILY 1” flashes in the display. 4 Press TUNING +/– to select DAILY 1 or DAILY 2, then press ENTER/ NEXT. “ON” appears and the hour indication flashes in the display. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K LBT-D690/XB600/XB6/XB6K DISCALL DOLBY NR OFF S 1 DOLBY NR OFF 1 ALL DISC S 5 Set the time to start playback. Press TUNING +/– to set the hour, then press ENTER/NEXT. The minutes indication flashes. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K ALL DISC S DOLBY NR OFF 1 LBT-D690/XB600/XB6/XB6K DISCALL DOLBY NR OFF S 1 Press TUNING +/– to set the minutes, then press ENTER/NEXT. The hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Press TUNING +/– until the music source you want appears. The indication changes as follows: nTUNER nCD PLAY nTAPE PLAY 8 Press ENTER/NEXT. The start time, the stop time, and the music source appear in turn before the original display returns. 9 Turn off the power. To check the setting 1 Press the timer button you have set, DAILY 1 or DAILY 2. 2 “TIMER OFF” appears in the display. 3 Press DAILY 1 or DAILY 2 again. To cancel the timer operation 1 Press the timer button you have set, DAILY 1 or DAILY 2. 2 “TIMER OFF” appears in the display. Notes • The system turns on 15 seconds before the preset time. • You cannot activate DAILY 1 and DAILY 2 at the same time. • You cannot set the timer if the timer on and off times are the same. • When you set the Sleep Timer, the Wake-up Timer will not turn on the system until the Sleep Timer turns it off. • You cannot activate the Wake-up Timer and Timer-recording at the same time. Timer-recording radio programs To timer-record, you must preset the radio station (see “Step 3: Presetting radio stations”) and set the clock (see “Step 2: Setting the time”) beforehand. 2 7 6 3,4,5 REC 1 Tune in the preset radio station (see “Listening to the radio”). 2 Press t/CLOCK SET. “SET” appears and “DAILY 1” flashes in the display. 3 Press TUNING +/– to select REC, then press ENTER/NEXT. “ON” appears and the hour indication flashes in the display. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K DOLBY NR OFF REC ALL DISC S LBT-D690/XB600/XB6/XB6K DISCALL DOLBY NR OFFREC S continued Timer-recording radio programs (continued) 4 Set the time to start recording. Press TUNING +/– to set the hour, then press ENTER/NEXT. The minutes indication flashes. LBT-D290/D590/G3300/XB3/XB3K/XB4/XB4K DOLBY NR OFF REC ALL DISC S LBT-D690/XB600/XB6/XB6K DISCALL DOLBY NR OFFREC S Press TUNING +/– to set the minutes, then press ENTER/NEXT. The hour indication flashes again. 5 Set the time to stop recording following the above procedure. The start time, the stop time, the recording source, and the preset station appear in turn before the original display returns. 6 Insert a blank tape in deck B. 7 Turn off the power. When recording starts, the volume level is set to the minimum. To check the setting 1 Press REC. 2 “TIMER OFF” appears in the display. 3 Press REC again. To change the setting, start over from step 1. To cancel the timer operation 1 Press REC. 2 “TIMER OFF” appears in the display. Notes • The system turns on 15 seconds before the preset time. • If the power is on at the preset time, the recording will not be made. • You cannot set the timer if the timer on and off times are the same. • When you set the Sleep Timer, the Timer- recording will not start until the Sleep Timer turns off the system. • You cannot activate the Wake-up Timer and Timer-recording at the same time. • Recording starts from the front side. Additional Information Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. Never pull the cord itself. • Should any solid object or liquid fall into the component, unplug the stereo system and have the component checked by qualified personnel before operating it any further. • The AC power cord must be changed only at the qualified service shop. On placement • Place the stereo system in a location with adequate ventilation to prevent heat build-up in the stereo system. • Do not place the unit in an inclined position. • Do not place the unit in locations where it is; — Extremely hot or cold — Dusty or dirty — Very humid — Vibrating — Subject to direct sunlight On operation • If the stereo system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens in...
Este manual também é adequado para os modelos :Stereo - LBT-XB3K (703.33 kb)
Stereo - LBT-XB6 (703.33 kb)
Stereo - LBT-XB6K (703.33 kb)