Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
26 Timer-activated recording of radio programs — REC Timer ............... 28 Additional Information Precautions ............................................ 30 Troubleshooting ................................... 31 Specifications ........................................ 33 Index ....................................................... 35 * European model only Getting Started Getting Started Step 1: Hooking up the system Follow steps 1through 4of the procedure below to hook up your system using the supplied cords and accessories. 1 4 2 3 AM loop antenna FM antenna Right speaker Left speaker 1Connect the speakers. 2Connect the FM and AM antennas. Connect the right and left speaker cords Set the AM loop antenna up before to the SPEAKER terminals of the same connecting it. color. Jack type A 3 L # # R 3 Note Keep the speaker cords away from the antennas to prevent noise. Red (3) Black (#) Insert this portion Extend the FM wire antenna FM75W AMU ANTENNA antennahorizontally AM loop Jack type B Inserting two size-AA (R6) Extend the FM AM ANTENNA U FM75W U AM loop antenna wire antenna horizontally 3For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. VOLTAGE SELECTOR 110V~120V 220V~240V 4Connect the power cord to a wall outlet. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). batteries into the remote E E e e Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Notes on batteries • Make sure the battery poles (plus/minus) are properly oriented. • Do not use a new battery with an old one. • Do not use different types of batteries together. • If you do not use the remote for a long period of time, remove the batteries to prevent possible damage from battery leakage and corrosion. • Do not use a battery that is leaking. • If a battery has leaked, clean the battery compartment and replace all the batteries. • Do not place the remote in an extremely hot or humid place. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. Getting Started Step 2: Setting the time Before you can use the system’s timer functions, set the internal clock. The clock uses a 24-hour system on the European model, and a 12-hour system on other models. The 24-hour system is used here for illustration purposes. 2,4 1 3,5 1 Press TIMER SET. The hour indication flashes. 000 2 Press l/L repeatedly to set the hour. 3 Press ENTER. The minute indication flashes. 1300 4 Press l/L repeatedly to set the minute. 1310 5 Press ENTER. The clock will begin operating. To reset the system clock You can reset the system clock even when the system is on or off. 1 Press TIMER SET. 2 Press l/L repeatedly until “SET CLOCK” appears, then press ENTER. 3 Repeat step 2 to 5 in “Step 2: Setting the time”. Tip If you make a mistake, start over from step 1. 1300 Step 3: Presetting radio stations — Preset The system can store a total of 30 preset stations (20 for FM and 10 for AM). This section explains how to tune in stations and preset them. 12 A bB x m M X z A u x + – ?/1 . > m M 3 4,6 l/L TUNER/ BAND j/J TUNING/ PLAY MODE 5 7 1 Press TUNER. “TUNER” appears. 2 Press TUNER BAND (or TUNER/BAND on the remote) to select FM or AM. 3 Press TUNING MODE (or TUNING/PLAY MODE on the remote) repeatedly until “AUTO” appears. 4 Press TUNING +/– (or j/J on the remote). The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo programs only) appear. 5 Press MEMORY on the remote. A preset number flashes. 1FM1005 PRESET PGM STEREO TUNED MHz 6 Press TUNING +/– (or l/L on the remote) repeatedly to select the preset number that you want. 3FM1005 PRESET PGM STEREO TUNED MHz 7 Press ENTER on the remote. The station is stored to the selected preset number. 8 Repeat steps 2 through 7 to preset other stations. continued FM1005 AUTO PGM STEREO TUNED MHz Getting Started Step 3: Presetting radio stations (continued) To tune in a weak station In step 3, press TUNING MODE (or TUNING/PLAY MODE on the remote) repeatedly until “AUTO” and “PRESET” disappear, then press TUNING +/– (or j/J on the remote) repeatedly to tune in the station. To change the preset number Start over from step 2. Tip The preset stations are saved in the system’s memory for about two days even if you disconnect the power cord or a power failure occurs. To change the AM tuning interval (not applicable on the European and Middle Eastern models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz on North American model). To switch the AM tuning interval, tune in any AM station first, then turn off the system. Pressing TUNING + down, turn the system back on. When you change the interval, all the AM preset stations are erased. To change back to the original interval,...