Assessments - 1, GPA: 3
(
)
)
|
Fotos e especificações Sony MHC-RG40 |
por este dispositivo também tem outras instruções :
Facilidade de uso
3 Press REC PAUSE/START. Deck B stands by for recording. The indicator on REC PAUSE/START flashes. 4 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 5 Press REC PAUSE/START. Recording starts. 6 Press nN to start playing the source to be recorded. Start singing along with the music. To stop recording Press x. Tips • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the CD function and not playing a CD. • When high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signal (Auto Level Control function). Falling asleep to music —Sleep Timer You can set the system to turn off after a certain time, so you can fall asleep to music. Press SLEEP on the remote. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90 t 80 t 70 t … t 10 t OFF * The system turns off when the current CD or tape finishes playback (for up to 100 minutes). To Press Check the SLEEP on the remote once. remaining time Change the SLEEP on the remote time to turn off repeatedly to select the time you want. Cancel the Sleep SLEEP on the remote Timer function repeatedly until “SLEEP OFF” appears. Waking up to music —Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the time” on page 8). 1 Prepare the music source you want to play. • CD: Load a CD. To start from a specific track, make a program (see “Programing CD tracks” on page 10). • Tape: Load a tape with the side you want to play facing forward. • Radio: Tune in the preset station you want (see “Listening to the radio” on page 12). 2 Adjust the volume. 3 Press CLOCK/TIMER SET on the remote. “SET DAILY 1” appears. 4 Press v or V repeatedly to select “DAILY 1 (or 2)”, then press ENTER. “ON” appears and the hour indication flashes. 5 Set the time to start playing. Press v or V repeatedly to set the hour, then press B. The minute indication flashes. Press v or V repeatedly to set the minute, then press ENTER. 6 Repeat step 5 to set the time to stop playback. 7 Press v or V repeatedly until the music source you want appears. The indication changes as follows: Other Features t TUNER y CD PLAY T t TAPE PLAY T continued Optional Components Optional Components Waking up to music (continued) 8 Press ENTER. The type of timer (DAILY 1 or DAILY 2), followed by the start time, stop time, and the music source, appear, then the original display appears. 9 Press ?/1 to turn off the system. To Do this Check the setting Press CLOCK/TIMER SELECT on the remote and press v or V repeatedly to select the respective mode (DAILY 1 or DAILY 2), then press ENTER. Change the setting Start over from step 1. Cancel the timer Press CLOCK/TIMER SELECT on the remote and press v or V repeatedly to select “TIMER OFF”, then press ENTER. Tip The system turns on 15 seconds before the preset time. Notes • You cannot activate DAILY 1 and DAILY 2 Timer at the same time. • When you use the Sleep Timer, Daily Timer will not turn on the system until the Sleep Timer turns it off. • You cannot activate Daily Timer and Timer- recording at the same time. Hooking up the optional A/V components You can connect your MD deck or VCR to this system. To the digital input jack of the MD deck To the audio output of the MD deck or VCR To Do this Make a digital Connect the optional optical cable. recording from CD to MD Listen to the Press MD (VIDEO). connected MD deck Listen to the Hold down MD (VIDEO) and connected VCR press ?/1. This switches the “MD” function to “VIDEO”. Once you enable the “VIDEO” function, just press MD (VIDEO). Notes • If you cannot select “MD” when you press MD (VIDEO), press ?/1 while holding down MD (VIDEO) when the system is on. “VIDEO” will be switched to “MD”. To return to “VIDEO”, do the same procedure. • Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected MD deck, press MD (VIDEO). • To return to “MD”, press ?/1 while holding down MD (VIDEO) again. • When you connect a VIDEO CD deck, set to “MD”. Connecting a video game machine Connect the video output of the video game machine to the VIDEO jack, and the audio output to the AUDIO jacks on the front panel of the system. Connect the VIDEO OUT jack on the rear panel of the system to the video input of a TV using the optional video cable. To listen to the sound of the connected video game machine, press GAME. To the video output of the video game machine GAME To the video input of a TV Notes • The video game machine image may appear on the TV screen even if the system is turned off. • See “Selecting the sound effect” on page 17 for video game sound effects. • If you press GAME while the system is off, the system turns on, ...
Este manual também é adequado para os modelos :Stereo - MHC-DX20 (239.77 kb)
Stereo - MHC-DX30 (239.77 kb)
Stereo - MHC-RG30 (239.77 kb)