Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
(go back) m (rewind) qa (8, 9) u (play/pause) 8 (8, 9) `/1 (power) 1 (6, 10) x (stop) 9 (8, 9) 5 6 7 8 9 q; qa qs Getting Started Getting Started Hooking up the system Do the following procedure 1 to 2 to hook up your system using the supplied cords and accessories. 21FM antenna Front speaker (Right) Front speaker (Left) 1 Connect the front speakers. 2 Connect the power cord to a wall outlet. Connect the speaker cords to the SPEAKER If the supplied adaptor on the plug does not terminals as shown below. fit your wall outlet, detach it from the plug (only for models equipped with the adaptor). Insert only the To turn on the system, press [/ 1 (power). L R Red (3) stripped portion. Black (#) Inserting two size AAA (R03) batteries into the remote Tip When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. Setting the time 1 Turn on the system. 2 Press CLOCK/TIMER/SLEEP SET on the remote. The clock indication appears. 3 Press TUNING/CLOCK/TIMER + or – on the remote repeatedly to set the time. 4 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote). The clock starts working. Tip If you made a mistake, perform from step 2. To change the preset time Perform from step 2. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. Getting Started CD CD Loading the CD 1 Press Z PUSH OPEN/CLOSE down to open the lid of the CD compartment. 2 Place a CD with the label side up on the compartment. When you play a CD single (8 cm CD), place it on the inner circle of the compartment. 3 Press Z PUSH OPEN/CLOSE down to close the lid of the CD compartment. Playing the CD — Normal Play/Shuffle Play/Repeat Play This system lets you play the CD in different play modes. Playing time Track number 1 Press CD (CD/REMAIN on the remote). 2 Press SHUFFLE or ENTER/PGM (TUNER MEM/ENTER/PGM on the remote) repeatedly until the mode you want appears in the display. Select To play No display The CD in original order. SHUFFLE The tracks on the CD in random order. PROGRAM The tracks on the CD in the order you want them to be played. (see “Programing the CD tracks” on page 9.) 3 Press u. Other Operations To Do this Stop playback Press x. Pause Press u. Press again to resume play. Select a track Press M > (to go forward) or . m (to go back). Find a point During play, press and hold M in a track > (to go forward) or . m (to go back). Release it when you find the desired point. Play repeatedly Press REPEAT during play until (Repeat Play) “REPEAT” or “REPEAT 1” appears. REPEAT: For all the tracks on the CD. REPEAT 1: For a single track only. To cancel playing repeatedly, press REPEAT until “REPEAT” or “REPEAT 1” disappears. Remove the CD Press Z PUSH OPEN/CLOSE. Programing the CD tracks —Program Play You can make a program of up to 28 tracks in the order you want them to be played. 1 Press CD (CD/REMAIN on the remote), then place a CD. 2 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote) repeatedly until “00 PR.01” appears in the display. 3 Press . m or M > until the desired track appears in the display. Programed step number Selected track number (including selected track) 4 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote). The track is programed. The next program step number appears, and “PROGRAM” flashes. 5 To program additional tracks, repeat steps 3 to 4. 6 Press u. Program Play starts. To Do this Check the total Press ENTER/PGM (TUNER number of MEM/ENTER/PGM on the remote) programed repeatedly in stop mode. Each time tracks you press the button, the selected track number and the programed step number appear in the display in turn. Cancel Program Press x twice until “PROGRAM” Play disappears from the display. The program you made will be erased. Tip The program you made remains after Program Play finishes. When Program Play remains in the system’s memory, “PROGRAM” flashes. To play the same program again, press CD (CD/REMAIN on the remote) and ENTER/PGM (TUNER MEM/ENTER/ PGM on the remote), then press u. Using the CD display Press REMAIN (CD/REMAIN on the remote) repeatedly. The display changes as follows: During normal play Elapsed playing time on the current track t Remaining time on the current track t Remaining time on the current CD t Elapsed playing time on the current track t ... CD Tuner Tuner Presetting radio stations You can preset up to 24 stations for FM and AM. 1 Press TUNER (TUNER/BAND on the remote) repeatedly to select FM or AM. 2 Press and hold TUNING (TUNING/ CLOCK/TIMER on the remote) + or – until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. “STEREO” (for a stereo program) appears. If it doesn’t stop automatically, press TUNING (TUNING/CLOCK/TIMER on the remote) + or – repeatedly to tune in a station manually. 3 Press TUNER MEM (TUNER MEM/ ENTER/PG...
Este manual também é adequado para os modelos :Stereo - CMT-EP30 (225.95 kb)
Stereo - CMT-EP40 (225.95 kb)