Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
To record only your favorite CD tracks You can record only your favorite CD tracks using Program Play. Between steps 3 and 4, perform steps 1 to 5 of “Creating your own program” (page 7). Tip You can press ./> to select tracks (after step 3 and before step 4). Recording on a tape manually — Manual Recording You can record just the portions you like from a CD on a tape. You can also record a radio program. You can use TYPE I (normal) tape. 1 Load a recordable tape. 2 Select the desired source to record. • CD: To record from this system’s CD player. • TUNER: To record from this system’s tuner. • MD: To record from the optional component connected to the MD IN jacks. 3 Press z on the unit, then start playing the desired source to record. Recording starts. Other operations To Do this Stop recording Press xZ on the unit. Pause Press X (tape) on the unit. recording Tip For recording from a CD, you can press ./> to select tracks (after step 2 and before step 3). Tape – Recording 11GB Sound Adjustment Adjusting the sound Timer Falling asleep to music You can adjust the bass and treble to enjoy more powerful sound. Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. To cancel the DSG, press DSG again. Adjusting the bass and treble Using buttons on the remote Press BASS +/– repeatedly to adjust the bass, or TREBLE +/– repeatedly to adjust the treble. Using buttons on the unit 1 Press BASS/TREBLE repeatedly to select “BASS” or “TREBLE”. Each time you press the button, the display changes cyclically as follows: BASS t TREBLE t Original display 2 Press ./> repeatedly to adjust the level while “BASS” or “TREBLE” appears. — Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP repeatedly. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: Auto* t 90 t 80 t … t 10 t OFF * The system automatically turns off in 100 minutes or after the current CD or tape finishes playing. Other operations To Press Check the SLEEP once. remaining time** Change the time SLEEP repeatedly to select the to turn off time you want. Cancel the Sleep SLEEP repeatedly until “OFF” Timer function appears. **You cannot check the remaining time if you select “Auto”. Note Do not set to “Auto” during Synchro Recording on a tape. Tip You can use the Sleep Timer, even if you have not set the clock. 12GB Waking up to music —Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 5). 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 7). • TUNER: Tune in a radio station (see “Listening to the radio” on page 9). 2 Press VOL +/– repeatedly (or turn VOLUME on the unit) to adjust the volume. 3 Press CLOCK/TIMER SET repeatedly until “ON” and “0:00” (or “AM12:00”) appear. 4 Set the time to start playback. Press ./> repeatedly to set the hour, then press CLOCK/TIMER SET. The minute indication flashes. Press ./> repeatedly to set the minute, then press CLOCK/TIMER SET. 5 Press CLOCK/TIMER SET repeatedly until “OFF” and “0:00” (or “AM12:00”) appear. 6 Set the time to stop playback following the same procedure as step 4. 7 Press ./> depending on the sound source you want to play. Each time you press the button, the display changes as follows: Tu y Cd 8 Press ?/1 to turn off the system. Other operations To Do this Check the setting Press CLOCK/TIMER SELECT repeatedly. Change the setting Start over from step 1. Cancel the timer Press CLOCK/TIMER SELECT repeatedly until “OFF” appears, then press CLOCK/TIMER SET. Notes • If you use the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated. • You cannot use the system’s tape deck and the optional component connected to MD IN jacks as sound sources for the Daily Timer. Timer 13GB Display Turning off the display — Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY. To cancel Power Saving Mode Press DISPLAY. Tips • The STANDBY indicator lights up even in the Power Saving Mode. • The timer continues to operate in Power Saving Mode. Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. Checking the remaining time (CD) Press DISPLAY repeatedly during CD playback. Each time you press the button, the display changes cyclically as follows: Elapsed playing time on the current track t Remaining time on the current track* t Remaining time on the current disc** t Clock display * “– –:– –” appears when a track is playe...