Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Change the setting Start over from step 1. Cancel the timer 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until “TIMER OFF?” appears, then press ENTER. Notes • You cannot activate the Play Timer and the Rec Timer at the same time. • If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, the Play Timer will not be activated. • You cannot use the optional component connected to VIDEO/MD IN jacks as the sound source for Play Timer. Timer 21GB Timer recording radio programs —Rec Timer You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see “Presetting radio stations” on page 12) and set the clock (see “Setting the clock” on page 8). Use buttons on the remote for the operation. 1 Tune in the preset radio station (see “Listening to a preset station” on page 14). 2 Press CLOCK/TIMER SET. “PLAY SET?” appears. 3 Press . or > repeatedly to select “REC SET?”, then press ENTER. “ON” appears and the hour indication flashes. 4 Set the time to start recording. Press . or > repeatedly to set the hour, then press ENTER. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. The start time, the stop time, and the preset radio station to be recorded (e.g., “TUNER FM 5”) appear in turn, before the original display returns. 6 Load a recordable tape into deck B. 7 Press TAPE to switch the function to TAPE. 8 Press PLAY MODE repeatedly until g appears to record on one side or h (or j) to record on both sides. 9 Press nN on the unit repeatedly to select recording side. If you select both sides recording or front side recording, press nN to light up the >>> indicator. If you record on the reverse side, press nN again to light up the <<< indicator. 10 Press ?/1 to turn off the system. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until “REC SELECT?” appears, then press ENTER. Change the setting Start over from step 1. Cancel the timer 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until “TIMER OFF?” appears, then press ENTER. Notes • You cannot activate the Play Timer and the Rec Timer at the same time. • If you use the the Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority. • Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, the Rec Timer will not be activated. • The volume is reduced to minimum during recording. 22GB Display Turning off the display — Power Saving Mode The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows: Demonstration display t Clock display* t No display (Power Saving Mode) * “– –:– –” appears if you have not set the clock. Note You cannot perform the following operations in Power Saving Mode. – setting the clock – changing the AM tuning interval (except for European, Russian and Saudi Arabian models) – turning on the system by pressing the function buttons – changing the CD power manage function Tips • ?/1 indicator lights up even in Power Saving Mode. • The timer continues to operate in Power Saving Mode. Adjusting the brightness of the display back light Press DIMMER on the unit repeatedly to select the desired setting while the system is on. The display changes cyclically as follows: DIMMER OFF t DIMMER 1 t DIMMER 2 t DIMMER 3* * DIMMER 3 is the darkest. Display 23GB Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. When a CD-TEXT disc or a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. When the unit detects CD-TEXT discs, the “CD TEXT” indication appears in the display. When the unit detects MP3 discs, the “MP3” indication appears in the display. Checking the remaining time and titles (CD/MP3) Press DISPLAY during Normal Play. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time or “– –.– –”1) t Remaining time of the disc or “– –.– –”1) t Track title (CD-TEXT disc or disc with MP3 audio tracks...
Este manual também é adequado para os modelos :Stereo - CMT-CPX22 (323.84 kb)