Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Sony, Modelo CMT-GPX7

Fabricante : Sony
Arquivo Tamanho: 343.72 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :
Stereo - CMT-GPX7 (362.59 kb)en
Stereo - CMT-GPX7 (428.11 kb)ru

Facilidade de uso


The minute indication flashes. Press ./> repeatedly to set the minute, then press ENTER. 6 Set the time to stop playing following the same procedure as step 5. 7 Press ./> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The start time, the stop time, and the sound source appear in turn, then the original display returns. 9 Press ?/1 to turn off the system. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “PLAY SEL” appears, then press ENTER. Change the setting Start over from step 1. Cancel the timer 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “TIMER OFF” appears, then press ENTER. Notes • If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, Play Timer will not be activated. • You cannot use the optional component connected to the MD/VIDEO jacks as sound sources for Play Timer. • You cannot activate Play Timer and Rec Timer simultaneously. Sound Adjustment/Timer 19GB Timer recording radio programs —Rec Timer To timer record, you must first preset the radio station (see “Presetting radio stations” on page 12) and set the clock (see “Setting the clock” on page 8). Use buttons on the remote for the operation. 1 Tune in the preset radio station (see “Listening to a preset station” on page 13). 2 Press CLOCK/TIMER SET. 3 Press ./> repeatedly until “REC SET” appears, then press ENTER. “ON” appears and the hour indication flashes. 4 Set the time to start recording. Press ./> repeatedly to set the hour, then press ENTER. The minute indication flashes. Press ./> repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. Rec Timer settings and the desired station appear, then the original display returns. 6 Load a recordable tape. 7 Press DIRECTION on the unit repeatedly to select “g” to record on one side or “h” (or “j”) to record on both sides. 8 Press N (or TAPE/nN on the unit) repeatedly to select the recording side. If you select both sides recording or front side recording, press N (or TAPE/nN on the unit) until “N” appears. If you record on the reverse side, press N (or TAPE/nN on the unit) again until “n” appears. 9 Press ?/1 to turn off the system. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “REC SEL” appears, then press ENTER. Change the setting Start over from step 1. Cancel the timer 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “TIMER OFF” appears, then press ENTER. Notes • If you use Rec Timer and Sleep Timer at the same time, Sleep Timer has priority. • Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, Rec Timer will not be activated. • The volume is reduced to minimum during recording. • Note that if Rec Timer is set at the same time as Play Timer sound source is set to tape, Rec Timer sound may be recorded onto the tape. • You cannot activate Play Timer and Rec Timer simultaneously. 20GB Display Turning off the display — Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches as follows: Clock display* y No display (Power Saving Mode) * The clock is displayed only if you set the clock. Tips • The ?/1 indicator lights up even in Power Saving Mode. • The timer continues to operate in Power Saving Mode. Note You cannot perform the following operations in Power Saving Mode. – setting the clock – switching the MD/VIDEO function – switching the CD power on or off using the CD power manage function – changing the AM tuning interval Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. When a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. Checking the remaining time and titles (CD/MP3) Press DISPLAY repeatedly during playback. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time or “– –.– –”* t Remaining time of the disc or “– –.– –”* t Track title (disc with MP3 audio tracks** only) t Album name* t Clock display t Bass level t Treble level * For discs with MP3 audio tracks ** When you play back a trac...

Este manual também é adequado para os modelos :
Stereo - CMT-GPX5 (343.72 kb)
Stereo - CMT-GPX6 (343.72 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias