Assessments - 4, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
4 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. Refer to the print on your system’s VOLTAGE SELECTOR for available settings. * Saudi Arabian model: 120 – 127 V 5 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). Inserting two R6 (size AA) batteries into the remote Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. 8GB Attaching the front speaker pads Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Front speaker (Left (4)/Right (4)) Sub woofer (4)* * MHC-GX750/GX450/RG551S/RG444S/RX550 only Placing the sub woofer (MHC-GX750/GX450/RG551S/ RG444S/RX550 only) To obtain a better bass reproduction, we recommend you to place the sub woofer on a solid floor where resonance is unlikely to occur. Notes • Always place the sub woofer vertically, keeping it a few centimeters away from the wall. • If the sub woofer is placed in the center of a room, the bass could be extremely weakened. This is due to the influence of the standing wave of the room. If this happens, move the sub woofer away from the center of the room or eliminate the cause of the standing wave, by placing a bookshelf against the wall, etc. Getting Started When carrying this system Perform the following procedure to protect the CD mechanism. Use buttons on the unit for the operation. 1 Make sure that all discs are removed from the system. 2 Hold down CD and then press ?/1 until “STANDBY” appears. After a few seconds later, “STANDBY” disappears and “LOCK” appears. 3 Unplug the power cord. 9GB Setting the clock Use buttons on the remote for the operation. 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET. 3 Press . or > repeatedly to set the hour. 4 Press ENTER. 5 Press . or > repeatedly to set the minute. 6 Press ENTER. The clock starts working. To adjust the clock 1 Press CLOCK/TIMER SET. 2 Press . or > repeatedly to select “CLOCK SET”, then press ENTER. 3 Do the same procedures as step 3 to 6 above. Notes • The clock settings are canceled when you disconnect the power cord or if a power failure occurs. • You cannot set the clock in Power Saving Mode (page 27). 10GB CD/MP3 Play Loading a disc Use buttons on the unit for the operation. 1 Press Z. 2 Place a disc with the label side up on the disc tray. To insert additional discs, press DISC SKIP/EX-CHANGE to rotate the disc tray. 3 Press Z again to close the disc tray. Notes • Do not use a disc with tape, seals or paste on it as this may cause malfunction. • Do not forcibly press the disc tray closed with your finger, as this may cause malfunction. Playing a disc — Normal Play/Shuffle Play This system lets you play audio CDs and discs with MP3 audio tracks. MP3 audio tracks cannot be played on MHC-GX250, MHC-RG121 and MHC-RG100. Example: When a disc is loaded Disc tray number Track number Disc presence indicator Playing time 1 Press CD (or FUNCTION repeatedly) to switch the function to CD. CD/MP3 – Play continued 11GB 2 Press PLAY MODE repeatedly in stop Other operations mode until the mode you want appears in the display. Select To play ALL DISCS All discs in the disc tray (Normal Play) continuously. 1DISC The tracks on the disc you (Normal Play) have selected in original order. ALBM All MP3 audio tracks in the (Normal Play) album on the disc you have selected in original order. When playing a non-MP3 disc, Album Play performs the same operation as 1DISC Play. ALL DISCS The tracks on all discs in SHUF (Shuffle random order. Play) 1DISC SHUF The tracks on the disc you (Shuffle Play) have selected in random order. ALBM SHUF The MP3 audio tracks in the (Shuffle Play) album on the disc you have selected in random order. When playing a non-MP3 disc, Album Shuffle Play performs the same operation as 1DISC SHUF Play. PGM The tracks on the disc in the (Program Play) order you want them to be played (see “Creating your own program” on page 14). 3 Press N. To Do this Stop play Press x. Pause Press X. Press again to resume play. Select a track Press . or > repeatedly (or turn l L on the unit). Select an album Press ALBUM – or + repeatedly of MP3 after step 2. Find a point in a Keep pressing m or M during track* playback and release it at the desired point. Select a disc in Press DISC SKIP (or DISC 1 – 3 stop mode or DISC SKIP/EX-CHANGE on the unit). Switch to CD Press DISC 1 – 3 on the unit function from (Automatic Source Selection). other function Exchange other Press DISC SKIP/EX-CHANGE discs while on the unit. playing R...
Este manual também é adequado para os modelos :Stereo - MHC-GX250 (497.52 kb)
Stereo - MHC-GX450 (497.52 kb)
Stereo - MHC-RG555 (497.52 kb)
Stereo - MHC-RG222 (497.52 kb)