Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
You can then listen to the sound from the component. Listening to audio from a connected component 1 Connect audio cords. See the illustration above. 2 Press FUNCTION repeatedly until “MD” or “VIDEO” appears. Start playing the connected component. Tip If you cannot select “VIDEO” by pressing FUNCTION repeatedly, turn off the system and then press ?/1 on the unit while holding down FUNCTION on the unit. The function will change from “MD” to “VIDEO”, and “VIDEO” will appear in the display. To change back to “MD”, repeat the same procedure. However, you cannot switch the MD/VIDEO function in Power Saving Mode. 23GB Transmitter (CMT-HPX10W only) Hooking up the transmitter (North American model only) 1 Set the transmitter by the following procedures. Select either AUDIO IN A or AUDIO IN B hook up depending on the jack type of the optional component you want to connect DC IN 9VOFF ON FILTERNOISE 12 3 CHANNEL R A AUDIO IN Personal computer, etc. 2 Connect the transmitter to a wall outlet using the supplied AC power adaptor. The transmitter automatically turns on. to DC IN 9V jack Transmitter AC power adaptor (supplied) Notes • The NOISE FILTER effects the sound only when you connect an optional component to the AUDIO IN A jacks of the transmitter. Connecting to the AUDIO IN B jack, the switch has no effect. • When you connect the transmitter to the analog out jacks, do not set the NOISE FILTER to ON. Otherwise, the volume will be limited. • If stereo mini jack is connected to LINE OUT and the NOISE FILTER is set to ON, audio output will be reduced and audio signal may be intermittent or auto muting will activate. In this case, set the NOISE FILTER to OFF. • While WIRELESS is selected as the function, bumping the transmitter or the unit may produce noise. • Use only the supplied AC power adaptor. Do not use any other AC power adaptor. Polarity of the plug • If the connected component has the AVLS (Automatic Volume Limiter System) function, be sure to turn off the function when using the transmitter. Otherwise, you will have to turn up the volume of the speaker, and that may cause distortion. • If the connected component has the BASS BOOST or MEGA BASS function, be sure to turn off the function when using the transmitter. Otherwise, the sound from the speaker may be distorted. the transmitter to. Transmitter to AUDIO IN B jack Right channel (red) to LINE OUT or REC OUT jack Optional Components (TV, VCR, Personal computer, etc.) Right channel (red) Left channel (white) to AUDIO IN A jack Left channel (white) Connecting cord (supplied) Unimatch plug adaptor (not supplied) to headphones jack (stereo phone jack) of optional components 24GB Where to place the transmitter Placing it up off the floor, such as on a desk, is recommended. Notes • Do not place the transmitter on or near the following objects. Doing so may cause noise. – Main unit, TV, speaker, fluorescent lamp, floor. – Radio waves generated such as cell phones and cordless phone systems or metal instruments are placed on the unit. – Inside a building with walls containing steel beams. – Area with many steel file cabinets, etc. – Area with many electrical appliances capable of generating electromagnetic noise. – Area facing roadways. – Radio transceivers in trucks, etc. – Wireless communication systems installed along roadways. • Even within the signal reception area, there are some spots (dead spot) where the RF signal cannot be received. This is a characteristic inherent to RF signals, and does not indicate a malfunction. By slightly moving the transmitter, the location of the dead spot can be changed. Hooking up the transmitter (European model only) You can use the wireless stereo headphone system (MDR-RF820RK) as a transmitter by hooking it up to an optional component. For details on how to hook up and place this system, refer to the operating instructions of the MDR-RF820RK. To listen to audio using this system, see “Listening to audio using the wireless system” on page 25. Notes • To use the MDR-RF820RK as a wireless stereo headphone system, use the connecting cord to plug the headphone system into the PHONES jack of the main unit. For details, refer to the operating instructions of the MDR-RF820RK. • Turn down the volume on the main unit before charging the batteries. When placing the wireless headphones on the transmitter to charge the headphone batteries, RF signals are not sent from the transmitter and noise may be output. • The optimum distance between the transmitter unit and the main unit is shorter than the distance between the transmitter unit and the wireless headphones. Listening to audio using the wireless system 1 Start playing the connected component. 2 Press FUNCTION repeatedly to switch the function to WIRELESS. (European model only) Change the color of the CHG indicator on the transmitter unit from green to red (or remove the wireless headphones from the transmitter). 3 Press +/– (or TUNING +/– on the unit). “AUTO SCAN” appears. If the s...
Este manual também é adequado para os modelos :Stereo - CMT-HPX7 (385.2 kb)
Stereo - CMT-HPX9 (385.2 kb)