Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• Search within a track/disc/USB. • Tune to a radio station. • Adjust time. EN f VOL +/- • Adjust volume. g MUTE • Mute or restore volume. h SOUND • Enrich sound effect with Digital Sound Control (DSC). i CLOCK • Set the clock. • View clock information. j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations. l DISPLAY • Adjust display brightness. m SHUFFLE • Play tracks randomly. n • Stop play or erase a program. o REPEAT • Play a track or all tracks repeatedly. p • Start, pause, or resume play. q USB/AUDIO IN • Select USB or AUDIO IN source. r • Press to open or close the disc compartment. 3 Get started Caution ••Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect speakers Note ••For optimal sound, use the supplied speakers only. ••Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. ANTENNAFMSPEAKER OUT (6) AC MAINS~ 100-240 V~50/60 HzSPEAKER OUT (6) EN Connect power Caution ••Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. ••Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. ••Before you connect the AC power cord, ensure that you have completed all other connections. ANTENNAFMSPEAKER OUT (6) AC MAINS~ 100-240 V~50/60 Hz Demonstrate the features In standby mode, press and hold for three seconds to demonstrate features of this device. »»The features are displayed one by one across the display panel. • To turn off the demonstration, press again. Prepare the remote control Caution ••Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. ••Risk of decreased battery life! Never mix different brands or types of batteries. ••Risk of product damage! When the remote control is not used for long periods, remove the batteries. To insert the remote control battery: 1 Open the battery compartment. 2 Insert the supplied AAA battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. Set clock 1 In standby mode, press and hold CLOCK on the remote control for more than two seconds. »»[24H] or [12H] hour format is displayed. 2 Press / to select [24H] or [12H] hour format. 3 press CLOCK to confirm. »»The hour digits are displayed and begin to blink. 4 Repeat steps 2-3 to set hour and minute. Note ••If no button is pressed in 90 seconds, the system exits...