Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Tip To reduce static noise on a weak FM stereo station, press FM MODE repeatedly until “MONO” appears to turn off stereo reception. You will lose stereo effect, but reception will improve. 2 Press TUNER MEMORY to select the tuner memory mode. 3 Press PRESET+/PRESET. repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new station. 4 Press to store the station. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. To tune to a preset radio station If you registered a radio station to a preset number 1 to 4, the radio station will be tuned in by just pressing the TUNER MEMORY NUMBER (1 to 4) when the system function is set to FM. If you registered a radio station to a preset number 5 or higher, press TUNING MODE repeatedly until “PRESET” appears then press PRESET+/PRESET. repeatedly to select the desired preset number. Tuner 13GB iPod/iPhone iPod/iPhone The Lightning connector works with iPhone 5, iPod touch (5th generation) and iPod nano (7th generation). USB works with iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (3rd, 4th and 5th generation), iPod classic and iPod nano (4th through 7th generation). Also refer to page 23. 1 Select the function. For iPhone 5, iPod touch (5th generation) or iPod nano (7th generation) Press iPod. For other iPod/iPhone models Press USB. 2 Connect the iPod/iPhone. For iPhone 5, iPod touch (5th generation) or iPod nano (7th generation) Connect the iPod/iPhone to the Lightning connector. For other iPod/iPhone models Connect the iPod/iPhone to the (USB) port, using the USB cable supplied with the iPod/iPhone. 3 Start playback. Press .. Other operations To Press Pause ./.. playback Stop .. Select a track ./.. Find a point Hold down ./. in a track during playback, and release the button at the desired point. Choose the /.. You can choose selected item the selected item much like the center button operation or the touch operation of the iPod/iPhone. Scroll up/ ./.. You can scroll up down the or down the menus menus much like the “Click Wheel” operations or the drag up-or-down operations of the iPod/ iPhone. Return to ./RETURN. the previous menu* * This operation may be invalid in some applications. 14GB Notes . The performance of the system may vary, depending on the specifications of your iPod/iPhone. Operate the iPod/iPhone directly if you cannot operate the iPod/iPhone normally using the system. .When connecting or disconnecting the iPod/iPhone, brace the system with one hand and take care not to press the controls of the iPod/iPhone by mistake. . Before disconnecting the iPod/iPhone, pause playback. . To change the volume level, use VOLUME +/.. The volume level does not change even if you adjust it on the iPod/iPhone. .Sony cannot accept responsibility in the event that data recorded to iPod/iPhone is lost or damaged when using an iPod/ iPhone with this system. To use the system as a battery charger You can use the system as a battery charger for an iPod/iPhone when the system is on. 1 Select the function. For iPhone 5, iPod touch (5th generation) or iPod nano (7th generation) Press iPod. For other iPod/iPhone models Press USB. 2 Connect the iPod/iPhone. For iPhone 5, iPod touch (5th generation) or iPod nano (7th generation) Connect the iPod/iPhone to the Lightning connector. For other iPod/iPhone models Connect the iPod/iPhone to the (USB) port, using the USB cable supplied with the iPod/iPhone. The charging begins when iPod/ iPhone is connected to the Lightning connector or the (USB) port. The charge status appears on the display of iPod/iPhone. For details, see the user’s guide of your iPod/iPhone. To stop charging an iPod/iPhone Disconnect the iPod/iPhone. Turning off the system also stops charging the iPod/ iPhone. USB Device USB Device Check the information on websites for compatible USB devices using the URLs listed under “USB devices” in “Compatible devices with this system” (page 23). For details on how to use the USB device, refer to the user’s guide supplied with your USB device. Notes . When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. See the operation manual supplied with the USB device to be connected for details on the operation method. .It may take a long time before “SEARCH” appears depending on the type of USB device connected. .Do not connect the system and the USB device through a USB hub. .When the USB device is inserted, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. .With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. .Compatibility with all encoding/writing...