Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• For a paired Bluetooth device that does not support the automatic reconnection, reconnect it with this product manually. Play audio via Bluetooth Note ••If the connected Bluetooth device supports the Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the product. ••If the device also supports the Audio Video Remote Control Profile (AVRCP), you can control play on this product. ••If the connected device does not support the AVRCP, control play on the connected device. ••If there is an incoming call on the connected mobile phone, music play pauses. Buttons Functions Start, pause, or resume play. EN Buttons Functions / Press to skip to the previous or next track. Stop play. Clear the pairing information In Bluetooth mode, press and hold on the remote control for 8 seconds. 7 Listen to FM radio Tune to an FM radio station Note ••Make sure that you have connected and fully extended the FM antenna. 1 Press FM or SOURCE repeatedly to switch the source to . 2 Press and hold / until the frequency starts to change. »»The product automatically tunes to the previous or next station with strong reception. • To tune to a station at a specific frequency, press / repeatedly until its frequency is displayed. Tip ••In FM mode, you can press to switch the sound setting between stereo and monophonic. EN Program radio stations automatically Note ••You can program a maximum of 20 preset radio stations. Press and hold PROG until the frequency starts to change. »»All available stations are programmed in the order of waveband reception strength. »»The first programed radio station is broadcast automatically. Program radio stations manually Note ••You can program a maximum of 20 preset radio stations. ••To overwrite a programmed radio station, store another one with its sequence number. 1 Tune to a radio station. 2 Press PROG to activate programming. »»The sequence number blinks. 3 Press / to allocate a sequence number from 1 to 20 to this radio station, and then press PROG to confirm. »»The preset sequence number and the frequency of this radio station are displayed. 4 Repeat steps 1-3 to program more stations. Tune to a preset radio station Press / to select the sequence number of the preset radio station. 8 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level • On the remote control, press VOL +/- repeatedly. • On the main unit, press VOL+/VOL- repeatedly. Mute sound • Press MUTE to mute or restore the sound. EN 9 Other features Use the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note ••Make sure that you have set the clock correctly. ••If the selected alarm source is unavailable, this product switches to FM mode automatically. 1 In normal standby mode, press and hold SLEEP/TIMER. »»The alarm time is displayed with the hour digits blinking. »»TIMER is displayed. 2 Press + VOL - or / repeatedly to set the hour, and then press SLEEP/TIMER to confirm. »»The minute digits blink. 3 Press + VOL - or / to set the minute, and then press SLEEP/TIMER to confirm. »»The alarm source name blinks. 4 Press + VOL - or / to select an alarm source. 5 Press SLEEP/TIMER to confirm. »» XX (XX indicates the volume level of alarm) blinks. 6 Press + VOL - to set the alarm volume, and then press SLEEP/TIMER to confirm. Deactivate/Re-activate the alarm timer In standby mode, press SLEEP/TIMER. »»If TIMER disappears, the alarm timer is deactivated. »»If TIMER is displayed, the alarm timer is activated. Stop an alarm When an alarm rings, press or SLEEP/TIMER to stop it. Note ••If you do not stop an alarm, it keeps ringing for 30 minutes, and then the product automatically switches to normal standby mode. Use the sleep timer You can set a period of time after which the product automatically switches to normal standby mode. In working mode, press SLEEP/TIMER repeatedly to select a preset period (120, 90, 60, 45, 30, or 15 minutes). »»When the sleep timer is activated, is displayed. ••To deactivate the sleep timer, press SLEEP/TIMER repeatedly until is displayed. EN Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. AUDIO IN 1 Press AUDIO IN or SOURCE repeatedly to switch the source to . 2 Connect an audio input cable with 3.5 mm plug on both ends between • the AUDIO IN socket on the back panel of this product, and • the headphone socket on the external device. 3 Play audio on the external device (refer to its user manual). Listen through headphone Plug a headphone into the socket on the front panel of main unit. Charge your USB device Connect your USB device, such as, smart phone and tablet, to this product with USB cable for charging. Note ••Philips does not guarantee the...