Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Turn down the volume of the connected Bluetooth device. To reset the system If the system still does not operate properly, reset the system to factory default settings. Use the buttons on the unit to perform this operation. 1 Unplug and plug the power cord back in. 2 Press "/1 to turn on the system. 3 Hold down x and LED COLOR at the same time for about 3 seconds. “RESET” appears in the display panel. All user-configured settings, such as preset radio stations, timer, and the clock are reset to factory default setting. Messages Messages CANNOT PLAY A disc that cannot be played back was inserted. DEVICE ERROR The USB device could not be recognized or an unknown device is connected. DEVICE FULL The memory of the USB device is full. FATAL ERROR The USB device was removed during transfer or erase operation, and may have been damaged. FOLDER FULL You cannot transfer onto the USB device because the number of folder has reached its maximum. NO DEVICE No USB device is connected. NO DISC There is no disc on the disc tray. NO MEMORY The memory selected for playback or transfer has no memory media inserted in the USB device. NO STEP All of the programmed steps have been erased. NO TRACK No playable file is loaded in the system. NOT IN USE You tried to perform a specific operation under conditions where that operation is prohibited. NOT SUPPORTED An unsupported USB device is connected, or the USB device is connected through a USB hub. OFF TIME NG The on time and off time of Play Timer or Recording Timer is the same. PROTECTED The USB device is write-protected. PUSH STOP You tried to perform an operation that can be performed only when the playback is stopped. READING The system is reading information of the disc or USB device. Some operations are not available. REC ERROR The transfer did not start, stopped partway, or otherwise could not be performed. STEP FULL You tried to program more than 25 steps. TRACK FULL You cannot transfer onto the USB device because the number of file has reached its maximum. UNLOCKED The disc theft-preventive function is released. Additional Information 35GB Precautions Precautions Perform the following procedure to protect the disc mechanism. Use the buttons on the unit to perform this operation. 1 Press "/1 to turn on the system. 2 Press CD. 3 Remove the disc. Press Z OPEN/CLOSE to open and close the disc tray. Wait until “NO DISC” appears in the display panel. 4 Hold down CD and FLANGER for 3 seconds. “MECHA LOCK” appears in the display panel. 5 Unplug the power cord. Notes on discs • Before playing, wipe the disc with a cleaning cloth from the center outward to the edge. • Do not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. On safety • Completely disconnect the power cord (mains...