Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
• Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods of time. Such objects can discolor or otherwise harmfully affect the finish. Maintenance • For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth. • Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation. Additional Precautions • Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions. • When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements. • To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night). • This instrument is designed to minimize the extraneous sounds produced when it’s played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones. • When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. • The hi-hat stand is supported by means of a tripod. When installing the hi-hat, make sure the legs of the tripod are opened wide enough to keep the equipment from falling over. • The hi-hat’s rubber surface may turn white, but this has no effect on the hi-hat’s function. • Do not remove the special VH-11 clutch from the hi-hat or disassemble the clutch. • When not using the hi-hat for extended periods, store the hi-hat in the open position to prevent placing any stress on the motion sensor unit. • High-precision sensors are located at the portion of the motion sensor unit indicated by the arrow in the left figure below. Take care not to subject this area to excessive shock, and do not allow any foreign objects to enter any gaps. Motion Sensor Unit • Over long periods of use, the portion of the motion sensor unit that comes into contact with the hi-hat (the damper) may become worn at the points indicated by the arrows in the right figure above. Such damper wear may prevent proper adjustment of the offset and may cause the hi-hat to swing with an unnatural motion. If this occurs, replace the damper. For more information on replacing the damper, contact Roland Service. This product complies with the requirements of European Directive 89/336/EEC. For EU Countries d Features Regarding the VH-11’s Compatibility Similar Touch and Feel as with an Acoustic Hi-Hat The VH-11 is constructed with one floating cymbal, making it compatible with commercially available hi-hat stands and providing the same feel as you get from an acoustic hi-hat, including the stick rebound, the looseness of the cymbal when you strike it, and the vertical action of the cymbal when you press and release the pedal. Smooth Transition Between Closed and Open Tones When you strike the pad while gradually opening the pedal, the tone smoothly opens in response to how much the pedal is opened. Allows Foot Splashes You can play foot splashes by pressing the pedal and then instantly opening it. Quick-Open Tone Changes With the VH-11 connected to a TD-20/12 sound module, you can get realistic tonal changes by hitting the closed hi-hat and immediately opening it. Dual Trigger Capability Sensors in both the top and edge portion make it possible to get different sounds by striking the bow (upper surface) and the edge (p. 9). Natural-Feeling Action You can achieve just the pedal feel you like by adjusting the pressure put on the pedal and the tension of the hi-hat stand spring. They’re Quiet! Rubber is used on the striking surface for a damping effect. Compatible with Commercially Available Hi-Hat Stands (p. 9) Sound Module Compatibility TD-20 Completely Compatible TD-12 Completely Compatible TD-10 + TDW-1 Compatible TD-8 Compatible TD-6V, TD-6 Compatible Completely Compatible: Tone changes more naturally from open to closed. Compatible: Although you can control the opening and closing, the expression of the half-open hi-hat differs from that achieved with the completely compatible TD-20/12. Package Contents Hi-Hat Motion Sensor Unit Insulating Plate Cable Tie Tuning Key 5 Mounting on the Hi-Hat Stand 1. Remove the clutch included with the hi-hat stand from the cymbal rod. * The clutch included with the hi-hat stand will not be used. * It is not necessary to remove the felt (or rubber) pad on the hih...