Assessments - , GPA:
(
)
)
Fabricante : Numark Industries
Arquivo Tamanho: 2.38 mb
Arquivo Nome : CDMIX3_QuickStart_01-39463baad52358b0c18e36b61b06c63f.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
13. Cue Mix Control – Adjusts the headphone blend of master output (PGM) and monitor (CUE) sound. 14. Headphone Level – Adjusts cue volume. 15. Headphone Jacks – Used to connect either 1/8” or 1/4” plugs for audio monitoring with headphones. CD PLAYER FEATURES 1. OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. Tray will automatically close after 30 seconds. 2. TIME (Time Button) - Switches the time display between elapsed playing time and remaining time on the track and remaining time on the entire CD. 3. CONT/SING - Will cause just a single track to play or all tracks in order by pressing once or twice. 4. LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. These functions are explained in the next section. 5. TRACK (Track Buttons) - Used to select the track to be played. 6. Folder/ +10 – Selects folder from which tracks are to be played. On a disc which contains no folders, this button is used to advance tracks in increments of 10 7. PROGRAM - Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program, either hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power. 8 . PITCH (Pitch Button) - Activates the Pitch Slider. To alternate between ± 8% and ±16%, press and hold PITCH button. LED will indicate active setting. 9. PITCH SLIDER - The pitch can be changed up to ±16% by pressing the PITCH button so the PITCH LED is lit, then moving the sliding fader. The pitch will not be changed if the PITCH LED is off. 10. SEARCH WHEEL (OUTER RING) - 3 forward and 3 reverse speed positions for searching through songs. The more you turn the wheel in either direction the faster you search through the music. 11. PITCH BEND/JOG WHEEL (INNER RING) - The jog wheel serves 2 functions depending on the current mode. a) The jog wheel will control a slow frame search when the CD is not playing. To set a new frame cue point, spin the wheel then press play when you have determined the proper position. Press CUE to return to the “CUE POINT” . b) When both CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. Either player can “catch up” or “fall back” to match the other player. The jog wheel will temporarily bend the pitch of the music if the song is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. By changing the pitch of one disc with respect to the pitch of the other disc, the beats can be matched. 12. CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has been reset to the position at which play was started. Steady lighting of this LED indicates the ready condition. 13. START/PAUSE ( Play/ Pause Button) - Each press of the Play/ Pause Button causes the operation to change from play to pause or from pause to play. 14. LOOP IN – Used for setting a start loop point and new cue points during playback. 15. LOOP OUT – Used for setting the end loop point and releasing the loop action. 16. RELOOP / STUTTER – Depending on mode, as explained further, this button is used for either repeating a previously set loop or seamlessly stuttering on the last set cue point. LCD DISPLAY FEATURES 1. PAUSE: Active when the unit is paused. 2. PLAY: Active while a CD is playing. 3. CUE: Flashing when the unit is setting a cue point. 10. Lit continuously when the unit is paused at a cue 11. point. 4. PROGRAM: Used for pre- programming the track 12. order to automatically be played by the unit. This is a great function if you need to leave the CD player 13. alone. 5. TIME MODE: (Elapsed) is for showing time as it is taking place.( Remain) shows how much time is left on a particular track. This function is controlled by 14. the TIME BUTTON. 15. 6. TIME BAR: Shows either time remaining or 16. elapsed depending on the setting of the TIME 17. BUTTON. 7. TRACK NUMBER: Shows the current track that the unit is playing. While searching folders, the selected folder is displayed, denoted by the letter F. 8. TRACK: Lights while unit is in Track Play mode. 9. SINGLE: Shows when the unit is set to play just one track at a time. When this is not lit, the CD will play continuously through all tracks. This function is controlled by the SING/ CONT BUTTON. MP3: Lit when unit is playing an MP3 file. ...