Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
The button changes to Save. 3. Enter your MGP 464’s IP address and your domain name in the appropriate fields. (This information is available from your network administrator.) 4. If your MGP has a password assigned, enter it. 5. Click the Save button. To set up e-mail addresses for notification, do the following for each recipient of e-mail alerts: 1. Click the Edit button at the right end of the address row. The Edit button changes to Save. 2. Enter the e-mail address of the recipient, and the file name on your computer (.eml extension) that contains the message. 3. Click the Save button to save the changes. The Save button changes back to Edit. Setting up SMTP authorization To set the MGP to require SMTP authorization before accepting any e-mail, 1. To enable the SMTP authorization fields, click the Edit button at the right of the Mail IP Address field. The Edit button changes to Save. 2. Select the SMTP Authorization Required check box, located below the Domain Name field. This enables the User Name and Password fields below the check box. 3. In the User Name and Password fields, enter a user name and a password that senders must enter in order for the MGP to accept their e-mail messages. For the User name, you can use any combination of letters, numerals, spaces, and symbols except the comma (,) and the single and double quotation marks (‘ and “). For the password, you can use all characters except the comma. The user name and password can each be from 1 to 30 characters. N You must specify both a user name and a password. 4. Click the Save button next to the Mail IP Address field to save your user name and password. To remove SMTP authorization, click Edit, clear the SMTP Authorization Required check box, then click Save. Firmware Upgrade screen The Firmware Upgrade screen enables you to install a new version of firmware to your MGP 464. You can download the latest firmware version from the Extron Web site to your computer. Appendix B provides more details on firmware updating. Firmware Upgrade screen Determining the current firmware version There are two methods you can use to find out what firmware version is currently installed on your MGP 464: • Using the LCD screen: Watch the LCD window as you connect the MGP 464 to a power source. The first piece of information displayed on the screen is the firmware version (along with the product name). • Using the System Status Web page: Select the Status tab on the MGP Web page to display the System Status screen. The firmware version is on the third line (to the right of the part number) in the System Description section. Downloading the firmware To obtain the latest version of MGP 464 firmware, 1. Visit the Extron Web site (and click the Download tab. 2. On the Download Center page, click the Firmware link on the left sidebar. 3. On the Firmware page, scroll down to the “MGP 464” line, or click the letter M in the alphabet displayed across the top of the page. 4. Click the Download link located at the far right of the MGP 464 line. 5. On the next page, fill in the required information, then click the Download_MGP464_FWnxnn.exe button. A File Download - Security Warning window is displayed. 6. Click Save. A Save As window opens. 7. Browse to the folder where you want to save the firmware installation file on your computer, and click Save. 8. When ready to install the new firmware on your computer, locate the downloaded file, and double-click on it to open it. 9. Follow the instructions on the Installation Wizard screens to install the new firmware on your computer. A Release Notes file, giving information on what has changed in the new firmware version, and a set of instructions for updating the firmware are also loaded to your computer. Updating the firmware on the MGP 464 After you have installed the new firmware on your computer, you must upload it to the MGP 464. Follow these steps to update the firmware using the Web pages. 1. On the MGP 464’s Configuration tab, select Firmware Upgrade from the sidebar menu to display the Firmware Upgrade screen. 2. Click Browse to open the Choose file window, and locate the firmware file on your computer or server. The file extension must be .S19. Choose file window C Uploading a file with an extension other than .S19 may cause the unit to stop functioning. 3. Open the firmware file. Its name appears in the field below the Current Firmware Version on the Firmware Upgrade screen. 4. Click the Upload button on the Firmware Update screen to start the firmware update process. While the firmware is being uploaded, the Upload button changes to Uploading...; and the LCD window on the MGP displays first “Firmware Upload Please Wait!!!,” then “Firmware Reboot Please Wait!!!” N While the firmware is uploading and rebooting, do not press any front panel buttons or make any selections on the Web pages. When the uploading process is complete, the Uploading... button on the screen changes back to Upload. N As an alte...
Este manual também é adequado para os modelos :Instrumentos musicais - Multi-Graphic Processor MGP 464 DI (5.31 mb)