Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
It produces 12 watts into 4 and 8 ohm direct connections plus a broad range of line amplification. Level controls are provided for mic/page and AUX. The mic/page input is accessable via screw terminals and AUX In may be accessed via screw terminals or RCA jacks. Bass and treble controls are functional on the total system (mic/page/AUX). When a signal is present at the mic/page input the AUX input is muted. This feature is internally defeatable when required. Twenty-five and seventy volt line output capability is standard equipment, and the unit is packaged for shelf or wall mounting convenience. The user-friendly control layout, coupled with state of the art circuit design, assures reliable long-term operation and smooth trouble-free installation. WALL OR SHELF MOUNTING The UA 12T can be mounted on a vertical or horizontal surface using the brackets formed on the bottom panel. For mounting on a wooden or paneled surface use No. 6 x V2" or larger wood screws. For mounting onto a masonry or drywall type surface use fasteners which are designed for this purpose. UA 12T ARCHITECTURAL AND ENGINEERING SPECIFICATIONS The mixer amplifier shall have one switchable microphone/paging channel and one dedicated auxiliary channel. The mic/page Input will be transformer balanced and will have the capability to automatically mute the AUX Input. The master section shall include two EQ controls providing 10 dB of boost or cut at 100 Hz and 10 kHz. The unit shall be packaged In a rugged metal chassis 10.137" wide by 6.416" tall by 2.775" deep. One-half inch mounting flanges shall be provided on each side. The unit shall operate from 120 volts AC, 60 Hz power. The internal amplifier shall be capable of delivering 12 watts RMS into 4 ohms and 8 ohms as well as providing 25 volt and 70 volt line outputs. The unit shall be capable of delivering rated power from 50 Hz to 20 kHz ± 1 dB into 4 ohms at its 4 ohm output at less than 2.0% distortion with system hum and noise at least 80 dB below rated power. The unit shall be a Peavey Architectural Acoustics Division model UA 12T. LIMITED WARRANTY Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from defects in material and workmanship. If within one (1) year from date of purchase a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered.) “Original purchaser” means the customer for whom the product is originally installed. Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is valid only as to products purchased and installed in the United States. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY. Peavey’s liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action, is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey's negligence. For information on service under this warranty, call a Peavey customer service representative at (601) 483-5376. ARCHITECTURAL ACOUSTICS® Features and specifications subject to change without notice. ©1991 A Division of Peavey Electronics Corporation 711 A street, P. O. Box 2898, Meridian, MS 39302-2898 / (601) 483-5376 / Telex 504115 I Fax (601) 484-4278 #80301520 Printed In U.S.A. 6/91...