Assessments - 1, GPA: 3 ( )

Fabricante : Adder Technology Arquivo Tamanho: 1.49 mb Arquivo Nome : Língua de Ensino:

This will cause some monitors to go into standby mode or switch off. The video signal can be re-enabled by selecting a computer using ‘HOTKEYs’ and ‘TAB’ or ‘HOTKEYs’ and ‘1’ (or ‘HOTKEYs’ and ‘2’ on the AdderLink Gold) . AdderLink Installation and Use Page 35 ‘HOTKEYs’ and ‘L’ - Disconnects the AdderLink XR’s keyboard and mouse from the computer that they are controlling and switches off all the red status lights. The video signal is switched off. If a password has not been set then the AdderLink can be re-enabled by selecting a computer using ‘HOTKEYs’ and ‘TAB’ or ‘HOTKEYs’ and ‘1’ (or ‘HOTKEYs’ and ‘2’ on the AdderLink Gold). If a password has been set then the AdderLink will alternately flash the NUM and SCROLL and then the CAPS lock lights on the keyboard connected to the XR unit. This indicates that a valid password must be entered to unlock the AdderLink. Simply type the same key combination as was set during configuration (see section 3.10) followed by the RETURN key. Note - if anyone has typed at the keyboard whilst in secure mode, it will be necessary to type RETURN first to clear the invalid password, then type the valid password followed by RETURN again. ‘HOTKEYs’ and ‘1’ - selects the remote computer attached to the XL unit ‘HOTKEYs’ and ‘2’ - selects the local computer attached to the XR unit (AdderLink Gold only) ‘HOTKEYs’ and ‘TAB’ – Selects the next computer (remote or local) ‘HOTKEYs’ and RETURN – Enters video compensation / configuration mode Examples of common hotkey sequences (assuming CTRL + ALT hotkey option): To lock the AdderLink press ba babaL LL release L LLba baba To 'tab through' computers (AdderLink Gold): press ba babav vvrelease v vvpress v vv release v vvpress v vvrelease vba vbavba AdderLink Installation and Use Page 36 3.5 Contending for control of the XL unit's computer (AdderLink Gold) Timeout mode On the AdderLink Gold, the computer attached to the XL unit may be accessed by the control port (Keyboard/Monitor/Mouse/Speakers/Microphone) on the XL unit or the control port on the XR unit. Only one control port may be active at any one time. As soon as keyboard or mouse activity is detected on a control port then this becomes the active control port. Keyboard, mouse or microphone activity on the inactive control port will have no effect on the XL's computer until no keyboard or mouse activity has been detected on the active control port for the timeout period. The timeout period is selected using option switches 7 and 8 on the XL unit (see section 2.6). The video is broadcast to both monitors if option switch 6 is in the OFF position or just to the active control port's monitor if option switch 6 is in the ON position (see section 2.6). Exclusive use mode The control port on the XL unit may obtain exclusive use of the XL unit's computer upon demand. To gain exclusive use, the operator uses the following hotkey combinations. Note that these hotkeys are only applicable to the keyboard connected to the XL unit. When exclusive use has been set the video picture from the XL unit's computer will not be sent to the XR unit even if broadcast mode has been selected. ‘HOTKEYs’ and ‘1’ - Gains exclusive use of the computer attached to the XL unit ‘HOTKEYs’ and ‘0’ - Relinquishes exclusive use of the computer attached to the XL unit. 3.6 Entering and exiting video compensation / configuration mode The AdderLink’s video compensation and user selectable options and functions are accessed in compensation / configuration mode. To enter this mode press the selected hotkey combination together with the RETURN key and to exit this mode press the RETURN key again. For example: AdderLink Installation and Use Page 37 To enter compensation / configuration mode: press ba babaf ff release f ffba baba To exit compensation / configuration mode: press f ff release f ff 3.7 Mouse control On the AdderLink Gold XR unit, the computers can conveniently be selected using a three button mouse or IntelliMouse. In order to switch to the other computer simply hold down the central mouse button or wheel button and click on the left hand mouse button. The other computer will then be selected. In order to use this feature you must enable it using the M2 option in configuration mode (see section 4.2). 3.8 Stereo audio support on the AdderLink Gold You may connect stereo speakers to both the AdderLink Gold XL unit and the AdderLink Gold XR unit. Audio from the computer connected to the XL unit is broadcasted to the speakers attached to the XL unit and to the XR unit. The speakers on the XR unit will output the audio signal from the XL unit if the remote computer (1) is selected or the audio from the computer connected to the XR unit if the local computer (2) is selected. The AdderLink transfers the audio speaker signals between the XL and XR units by multiplexing the audio signals onto the video signals. A small degree of audio noise is introduced by this process. The effect of this noise may be reduced by the foll...

Baixe o seu

Para fazer o download, introduza 2 dígitos :