Assessments - 1, GPA: 5 ( )

Fabricante : Krell Industries Arquivo Tamanho: 351.27 kb Arquivo Nome : Língua de Ensino:

What is it? A. Check that the shorting pins for the Showcase Amplifier are inserted into the XLR inputs (the unit is shipped with the pins in place). When using the single-ended inputs, shorting pins must be inserted between pins 1 and 3 to keep external noise from corrupting the signal. For more information, see Connecting the Showcase Amplifier to Your System, on page 10. Q. I cannot turn the amplifier on. Why not? A. Make sure the stand-by LED is not flashing. If the stand-by LED is flashing, unplug the amplifier from the AC wall receptacle and then plug it back into the AC wall receptacle. If the stand-by LED continues to flash, contact your Krell-authorized dealer or distributor, or Krell. If no LEDs are illuminated, check the power cord and check the AC mains fuse. To remove the fuse, unplug the power cord from the amplifier and slide out the fuseholder. Q. I get no signal from one of the amplifier channels when the unit is on. Why not? A. Make sure you are not connected to channels 6 or 7 on a Showcase 5, or to channel 7 on a Showcase 6. If you are using the single-ended input, make sure the shorting pin is inserted between pins 1 and 3, and not between pins 2 and 3. Krell Showcase Amplifier Warranty To register your product for warranty benefits, please complete and return the Warranty Registration Card enclosed in the shipping box within 15 days of purchase. Thank you. This Krell product has a limited warranty of five years for parts and labor on circuitry. Should this product fail to perform at any time during the warranty, Krell will repair it at no cost to the owner, except as set forth in this warranty. The warranty does not apply to damage caused by acts of God or nature. The warranty on this page shall be in lieu of any other warranty, expressed or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. There are no warranties which exceed beyond those described in this document. If this product does not perform as warranted herein, the owner’s sole remedy shall be repair. In no event will Krell be liable for incidental or consequential damages arising from purchase, use, or inability to use this product, even if Krell has been advised of the possibility of such damages. Proof of purchase in the form of a bill of sale or receipted invoice substantiating that the unit is within the warranty period must be presented to obtain warranty service. The warranty begins on the date of the original retail purchase, as noted on the bill of sale or receipted invoice from an authorized Krell dealer or distributor. Previously owned equipment, when re-purchased from an authorized Krell dealer or distributor, has the balance of the original warranty, based on the original date of manufacture. The warranty for Krell products is valid only in the country to which they were originally shipped, through the authorized Krell distributor for that country, and at the factory. There may be restrictions on or changes to Krell’s warranty because of regulations within a specific country. Please check with your distributor for a complete understanding of the warranty in your country. If a unit is serviced by a distributor who did not import the unit, there may be a charge for ser vice, even if the product is within the warranty period. Freight to the factory is your responsibility. Return freight within the United States (U.S.A.) is included in the warranty. If you have purchased your Krell product outside the U.S.A. and wish to have it serviced at the factory, all freight and associated charges to the factory are your responsibility. Krell will pay return freight to the U.S.A.-based freight forwarder of your choice. Freight and other charges to ship the unit from the freight forwarder to you are also your responsibility. Krell is not responsible for any damage incurred in transit. Krell will file claims for damages as necessary for units damaged in transit to the factory. You are responsible for filing claims for shipping damages during the return shipment. Krell does not supply replacement parts and/or products to the owner of the unit. Replacement parts and/or products will be furnished only to the distributor performing service on this unit on an exchange basis only; any parts and/or products returned to Krell for exchange become the property of Krell. No expressed or implied warranty is made for any Krell product damaged by accident, abuse, misuse, natural or personal disaster, or unauthorized modification. Any unauthorized voltage conversion, disassembly, component replacement, perforation of chassis, updates, or modifications performed to the unit will void the warranty. The operatin...

Baixe o seu

Para fazer o download, introduza 2 dígitos :