Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Do not force CD into unit. To remove disc press EJECT button and gently remove CD, place CD back into jewel case. CD can be ejected from player at any time. Player will automatically stop when CD is removed. NORMAL DISC PLAY: Insert CD into player and press PLAY/PAUSE button if CD hasn’t already begun to play. Disc play will start at first track. Player display will indicate track number and time. PAUSE: To pause CD during play, press PLAY/PAUSE button. Play will stop immediately. To resume play, press PLAY/PAUSE button again. STOP: To stop play, press STOP. The disc will stop and the CD player will return to beginning of first track. FAST FORWARD AND FAST REVERSE: To skip forward during disc F-FWD. To skip back, press and hold R-RWD. TRACK SEARCH: To forward to the next track, press F- FWD once. The CD player will forward to the next track each time the button is pushed. To search for previous tracks, press R-RWD. The CD player will reverse to the next track each time the button is pushed. REPEAT DISC PLAY: Use the REPEAT button for repeat of a selected or programmed track or press twice to repeat all tracks or programmed tracks. SHUFFLE: Press the SHUFFLE button to play discs tracks randomly. PROGRAMMED DISC PLAY: It is not possible to enter programs during disc play. Entering a program: 1. Press the PROGRAM button. 2. Using the TRACK button to select the track to be programmed. 3. Once desired track is selected, press the ENTER ( Same as REPEAT) button. 4. Repeat 1-3 to add more selections to the program. 5. Once all selected tracks are programmed, push the PLAY button. This unit will accept a maximum of 20-programmed tracks. 6. Press the PAUSE to pause disc. The programmed selections will remain in memory. 7. To clear the programmed tracks. Press the STOP button. NOTE: Channel 3 Volume Control controls Volume of CD Player. INPUTS AND OUTPUTS: MICROPHONE/INSTRUMENT INPUTS: There are 3 types of input jacks on your TRAVEL AUDIO PRO, as follows: 2 – 1/8” phone jacks (3.5 mm) 2 – RCA jacks 3 – XLR or .” combination jacks (this jack will accept either type) There are two types of microphones the TRAVEL AUDIO PRO is designed for: Dynamic - for standard dynamic cartridge microphones Condenser - for electret or condenser microphones, which require phantom power (supplied from the amplifier) There are three microphone channels (Channel 1, Channel 2, and Channel channel has individual controls. Each channel will accept of the listed microphone types, but only one microphone or instrument can be plugged into each channel at a time. You can add pre-recorded music during your presentations by using the internal CD or tape player. In addition, external sources such as a computer or MP3 player can be used by connecting to the RCA jacks. Channel 3 Volume Control controls the volume for units connected to these inputs. It is recommended to use only one of these devices at a time. RECORD/LINE OUT: This provides the output of the mixer. To record or connect to a house PA system, External Equalizer, Audio Mixer, or Amplivox S1292 powered companion speaker, connect the LINE OUT on the amplifier, to the input on an external recorder or PA system. This jack functions the same as a signal “send”. (See Special Features Section) LINE INSERT: Use this jack to supply a signal directly to the power amp. This jack functions as a signal “return”. Doing so will disconnect the mixer section of the TRAVEL AUDIO PRO and act as a power amplifier. See the “Special Features” section for more details. This is the input to use for the return signal from the Output of the Equalizer, Audio Mixer or other type of audio equipment connected in the paragraph above. (See Special Features Section) EXTERNAL SPEAKER OUTPUT: This input allows for the use of an extra non-powered speaker. Care must be taken when using an external speaker. The speaker must be of suitable power handling and impedance. (100 Watts peak at 4 ohms) CAUTION: Improper speaker selection could result damage or fire. SPECIAL FEATURES To facilitate this discussion, see the Front Panel Diagram on page 11 as we identify the following functional blocks: Mixer stage – includes all the individual volume controls, input jacks (14”-XLR combo, 3.5mm, RCA) and mic/line & phantom power switches for the 5 input channels (2 internal wireless, 3 direct or corded) ‘Record/Line Out’ and ‘Line Insert’ stage – see below. Output stage - includes the music/voice switch, treble, bass & master volume controls, power amps and speakers. The TRAVEL AUDIO PRO panel has .” phone jacks labeled ‘Record/Line Out’ and ‘Line Insert’ respectively. ‘Record/Line Out’ provides a feed from the Mixer stage, but before this signal goes through the Output stage. In other words, this signal is not affected by settings on the music/voice switch, treble, bass & master volume controls. It can be used to drive an external recording device or another audio system. The advantage to this configuration (pre-EQ & master volume) is t...
Este manual também é adequado para os modelos :Instrumentos musicais - SW905 (288.04 kb)