Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Restoring Factory Defaults ALNOTE An edited patch can be stored in a user bank (A – d). It is also possible to store an existing patch in another location to create a copy. In play mode or edit mode, press the [STORE] key The bank and patch number flash on the display. NOTE Patches of preset banks (0 – 3) are read-only. No patches can be stored or copied into these locations. If you press the [STORE] key while a patch from these banks is selected, the patch "A0" (bank A, patch number 0) will be selected automatically as default store/copy target. A0 Select the store/copy target bank and patch number • Use the [W]/[Q] foot switches to select the bank/ patch number. A8 • To switch only the bank, use the [BANK UP· TAP] key. NOTE · Only a user bank (A – d) can be selected as store/copy target bank. · During the store/copy process, the foot switch (FS01) cannot be used to change banks. B8 ZOOM G1N/G1XN ZOOM G1N/G1XN 16 17 Changing the Way Patches Are Called Up Changing the Way Patches Are Called Up select". In this mode, you first select the patch to use next, and then perform an additional step to activate the patch. 1. Turn power to the G1N/G1XN on while holding down the [Q] foot switch. The indication "PrE-SElEct" scrolls on the display. 2. In play mode, select the patch to use next. The selected new bank and patch number flash on the display. The sound does not change yet. B0 3.When you have specified the patch to use, press both [W]/[Q] foot switches together. B0 The patch change is accepted, causing the sound to change, and the display changes from flashing to permanently lit. B0B0 4.To return the G1N/G1XN to the normal patch selection method, simply turn power off and then on again. The patch selection method is automatically reset to conventional operation. Using an External Foot Switch or Pedal (G1N only) The [CONTROL IN] jack on the G1N allows connection of an optional foot switch or expression pedal to control effects and the rhythm function. This section explains how to use this capability. Using a foot switch Simply connect the optional foot switch (FS01) to the [CONTROL IN] jack of the G1N and turn the unit on. This allows you to switch banks and specify the tempo for rhythm patterns with the foot switch. Depending on the currently selected mode, the foot switch operates as follows. • Play mode Pressing the foot switch selects the next higher bank. • Rhythm mode When you press the foot switch two times or more, the G1N detects the interval and automatically adjusts the tempo accordingly (tap tempo function). • Edit mode/Store mode The foot switch has no effect. Using an expression pedal When the optional expression pedal (FP01/ FP02) is connected to the [CONTROL IN] jack of the G1N, you can change effect parameters in real time or use the pedal as a volume controller. The function of the expression pedal can be saved individually for each patch. 1. Plug the FP01 or FP02 into the [CONTROL IN] jack of the G1N. 2. In play mode, select a patch for which you want to use the expression pedal. 3.Set the Module selector to a position other than "PLAY" or "RHYTHM". The G1N/G1XN goes into edit mode. 4.Hold down the RHYTHM [R/P] key and turn the [VALUE] knob to select one of the following modules for control by the expression pedal. Using an External Foot Switch or Pedal (G1N only) Display Control target OF Off VP Volume WP COMP/EFX module GP DRIVE module MP MODULATION module DP DELAY module RP REVERB module HINT · In the section "Effect Types and Parameters" (• p. 21), effect types/ parameters that can be controlled with the expression pedal are indicated by a pedal symbol. · If a module is selected for which no pedal symbol is shown, the expression pedal will have no effect for that patch. 5.Save the patch. The expression pedal setting is stored with the patch. 6.In play mode, select the patch and operate the expression pedal. The respective parameter changes. In bypass mode, the expression pedal always functions as a volume pedal, regardless of the setting. HINT The expression pedal operates also in edit mode. ZOOM G1N/G1XN ZOOM G1N/G1XN 18 19 Effect Types and Parameters Using the built-in expression pedal (G1XN only) Effect Types and Parameters Effect Types and Parameters Using the built-in expression pedal (G1XN only) Effect Types and Parameters • Module selector • Tap Shows the position of the knob at which Indicates a parameter that can be set by this module/parameter is called up. repeatedly tapping the [BANK UP·TAP] key. When the module/effect type is selected in edit mode, the parameter • Expression pedal (modulation rate or delay time, etc.) will be Indicates a parameter that can be set according to the interval in which the controlled with the expression pedal. key is pressed. * Manufacturer names and product names mentioned in this listing are trademarks or registered trademarks of their respective owners. The names are used only to illustrate sonic characteristics after which the effects are mod...
Este manual também é adequado para os modelos :Instrumentos musicais - G1N (10.99 mb)