Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Tweak the AX3’s Programs Each of the AX3’s 80 programs can be modified to your liking. This includes chaning effects types as well as effect parameters. 1. Set the Function Selector knob to the effect type you wish to edit (i.e. PRE FX, DRIVE/AMP, MOD, DELAY/REV, etc.) 2. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to scroll through the various effect choices. (Press UP & DOWN buttons simultaneously to turn FX type off). Note: The effect chart printed on the face of your AX3 will be indispensable in locating and identifying the various available effect choices. There is also a more detailed chart in the back of the included manual. 3. Use the Value Knob to adjust the FX’s main parameter. 4. To fine tune the sub-parameters (not applicable to LEVEL, NR, CAB, MIC & BODY, TONE, and NOTCH), set the Function Knob to the corresponding effect type “PARAM” position (the next position moving clockwise on the knob). Choose the desired parameter with the Write (“UP”) & Cancel (“DOWN”) Buttons and use the Value Knob to adjust the parameter value. 2 AX3-Series EasyStart Note: A list of effect parameters can be found in the aforementioned effect chart in the rear of the manual. This will be very helpful in determining which parameter is being adjusted. Tip: The Original Value Indicator (small dot in the lower right corner of the Program/Value Display) can be used to indicate the saved effect/ parameter settings of the currently selected program. Simply put, when the Original Value Indicator is lit, the previously saved effect/parameter setting has been selected. E EEx xxa aam mmp ppl lle ee ( ((a aal lll ll A AAX XX3 33 m mmo ood dde eel lls ss) )) 1. Select MOD with the Function Knob. 2. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “F2” (CL Flange). Then use the Value Knob to adjust the CL Flange effect’s Main parameter (SPEED). 3. Turn the Function Knob clockwise one position to PARAM. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “P2” (DEPTH). Use the Value Knob to adjust the level of the DEPTH parameter. Note: In this mode, if you press the Program Up (Value) switch, the current parameter value will be displayed. If you press the Program Down (Type/Param) switch, it will display to the currently selected FX type/parameter. Saving a Program You’ve tweaked and turned some knobs, and you like the changes that you’ve made – now to save your program: 1. Set the Function Knob to the “WRITE” position, and press WRITE (“UP”) Button. A User program number will blink in the Program/Value Display. 2. Use the Program Up and Down Switches or Value Knob to select the destination program number (1 - 40) 3. Press the WRITE (“UP”) Button once again, and your program will be stored in the specified location (“CP” will display briefly indicating the process is complete). Amp/Line Setting (AX3G only) The AX3G’s output may be optimized to suit specific monitoring sources via the Amp/Line setting. Amp/Line settings can be made under the P5 parameter of ...
Este manual também é adequado para os modelos :Instrumentos musicais - EASYSTART AX3A (62.88 kb)
Instrumentos musicais - EASYSTART AX3B (62.88 kb)