Assessments - 4, GPA: 4.8
(
)
)
|
Facilidade de uso
4. Press the [TAP/STOP] switch to stop playback. The [REC/PLAY/DUB] switch will blink green. Erasing the phrase 1. Hold down the [TAP/STOP] switch for two or more seconds. The [REC/PLAY/DUB] switch will blink red, and the phrase will be erased. * The erased phrase cannot be recovered. Using the LOOPER Function and Delay at the Same Time Using the LOOPER Function and Delay at the Same Time r function and the delay at the same time. Normally, you cannot use the delay when the [DELAY/LOOPER] knob is in the LOOPER position. However, if panel settings that use the delay are stored in the SOLO function, and you then turn SOLO on, you’ll be able to use the delay while using the LOOPER function. If you turn the SOLO function on while using the LOOPER function, and then switch between JC CLEAN and LEAD, you’ll be able to record your performance using the delay settings saved for each channel. * Switching the delay on or off or changing the delay time is not possible. Portugues Italiano DeutschNederlands Espanol Francais English Copyright * Recording, duplication, distribution, sale, lease, performance, or broadcast of copyrighted material (musical works, visual works, broadcasts, live performances, etc.) belonging to a third party in part or in whole without the permission of the copyright owner is forbidden by law. * Do not use this unit for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this unit. 15 16 Sample Settings * For information on how to set the delay time, refer to “DELAY/LOOPER” (p. 6) Extreme [SELECT] switch=LEAD CUBE-40XL CUBE-80XL [SELECT] switch=LEAD This is an extreme sound with intense distortion. This is a high-gain sound that packs a lot of punch in the low end, while delivering a great deal of edge in the upper range. You can obtain variations in the sound by moving the [MIDDLE] knob. If you turn on HEAVY OCTAVE, you can achieve an even greater sense of distortion in the low end. Space Clean Delay time = approx. 250 ms (reference) [SELECT] switch=JC CLEAN CUBE-40XL CUBE-80XL Delay time = approx. 250 ms (reference) [BRIGHT] switch=OFF [SELECT] switch=JC CLEAN This is a transparent sound that uses spatial effects. Use the JC CLEAN amp, which is modeled on the Roland JC-120, and add chorus, long delay, and reverb. Using this setting with a guitar that has single-coil pickups makes for arpeggios and chord strumming with beautiful resonance. If you’re using a guitar with humbucker pickups on CUBE-80XL, turn the [BRIGHT] switch to ON to achieve a bright, open sound. Setting the delay time to a value that makes the delay sound heard slightly ahead of the tempo of the phrase played produces a thicker sound. Surf Line [SELECT] switch=LEAD CUBE-40XL CUBE-80XL [SELECT] switch=LEAD This sound is perfect for the surf music popular in the 1960s. Using this setting with a guitar that has single-coil pickups makes for an edgy sound. Applying deep spring reverb and using muting picking and chromatic runs (muted picking with glissandos) produces the classic surf sound. 17 Nederlands Portugues Espanol Italiano Francais Deutsch English Rockabilly Slap Delay time = approx. 90 ms (reference) [SELECT] switch=LEAD CUBE-40XL CUBE-80XL Delay time = approx. 90 ms (reference) [SELECT] switch=LEAD This is the slapback-echo sound used in rockabilly and country. The BLACK PANEL amp produces a clean sound that is bright and sweet, with a powerful midrange and high end supported by a thick bass. By making the low and high ends more prominent while keeping them balanced, and also suppressing the midrange if the situation calls for it, you can bring out the dazzling resonance of the guitar even more beautifully. The sound of a guitar that has single-coil pickups with heavy tremolo and reverb applied is also distinctive. Loud Metal Delay time = approx. 600 ms (reference) [SELECT] switch=LEAD CUBE-40XL CUBE-80XL Delay time = approx. 600 ms (reference) [SELECT] switch=LEAD This sound produces heavy low-end reverberations when lower strings are played while muted, and airy sustain when chords are played. Playing with a humbucking rear pickup produces even more extreme distortion. What’s more, you can make the sound even heavier by using drop tuning or other such settings. When you want to make the distortion edgier on CUBE-80XL, boost the [PRESENCE] setting. Also, when you’re using this as the lead sound, raising the midrange and applying a long delay produces a fat sound with sustain. Dynamic Style Delay time = approx. 650 ms (reference) [SELECT] switch=LEAD CUBE-40XL CUBE-80XL Delay time = approx. 650 ms (reference) [SELECT] switch=LEAD DYNA AMP is an original amp that uses relative picking intensity to create changes in distortion depth. First, adjust the [GAIN] knob so that a clean tone is obtained with soft picking and heavy distortion is obtained when you pick hard. Now mixing arpegg...
Este manual também é adequado para os modelos :Instrumentos musicais - CUBE-80XL (163.07 mb)