Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Convenient Functions DELAY parameter list Parameter OFF/ON Turns the DELAY OFF/ON. TYPE Use this to choose the type of delay. SINGLE This is a simple monaural delay. PAN This delay is specifically for stereo output. This provides a tap delay effect that divides the delay time between the left and right channels. STEREO The direct sound is output from the left channel, and the effect sound is output from the right channel. REV. This produces the effect of playback in reverse. ANALOG This produces a mild analog delay sound. TAPE This setting provides the characteristic wavering sound of a tape echo. MOD. This is a delay with a pleasant chorus-type effect added to the delay repeats. HICUT This features a more suppressed high end than the Single delay. PH.LOOP This provides a phrase loop effect where you can record up to 40 seconds of a performance and play it back repeatedly in a loop. You can use the loop for backing, and add more material by overdubbing additional performances in the loop. OVERDUB PLAY RECSTANDBY PH.LOOP CTL1 PH.LOOP STOP lit (Assignment example) PH.LOOP REC/PLAY CTL2 lit lit You'll need a footswitch (e.g., FS-6; sold separately) in order to use PH.LOOP. DELAY TIME This sets the delay time. When set to BPM, the value of the DELAY TIME parameter is set according to the value of the “EFFECT TEMPO” (p. 30) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song. FEEDBACK This sets the number of repetitions for the delay. EFFECT LEVEL This sets the volume level of the effect. When TYPE is set to REVERSE, this adjusts the balance of direct and effect sound. Deutsch Francais Italiano PortuguesEspanol NederlandsEnglish The PHRASE LOOP function When you choose PHRASE LOOP from MENU in the top screen, the delay TYPE will switch to Phrase Loop (PH.LOOP) and pedal assignments will be made automatically. • In the PHRASE LOOP screen, the pedals are assigned as follows. CTL1=PH.LOOP STOP CTL2=PH.LOOP REC/PLAY • When you exit the PHRASE LOOP screen, the eect and pedal assignments will return to their previous settings. 29 Convenient Functions REVERB parameter list EZ CHARACTER parameter list Parameter OFF/ON Turns the REVERB OFF/ON. TYPE Use this to choose the type of reverb. AMBI. Simulates an ambience mic (off-mic, placed at a distance from the sound source) used in recording and other applications. Rather than emphasizing the reverberation, this reverb is used to produce a sense of openness and depth. ROOM Simulates the reverberation in a small room. Provides warm reverberations. HALL 1 Simulates the reverberation in a concert hall. Provides clear and spacious reverberations. HALL 2 Simulates the reverberation in a concert hall. Provides mild reverberations. PLATE Simulates plate reverberation (a studio effect unit that uses the vibration of a large metal plate to produce reverberation). Provides a metallic sound with a distinct upper range. REVERB TIME Adjusts the length (time) of reverberation. HIGH CUT The high cut filter adjusts the amount of high frequencies in the reverb sound. When “FLAT” is selected, the high cut filter will have no effect. EFFECT LEVEL This sets the volume level of the effect. Parameter EFFECT TEMPO This sets the tempo when RATE parameters such as DELAY TIME, PHASER, and FLANGER are synchronized to the song tempo. Set DELAY TIME and RATE to (Whole Note)-(16th Note). You can also input the tempo by tapping [SPEED] in time with the beat (TAP function). EZ CHAR This adjusts the character of the guitar tone, ranging from solo tone (-20) to a tone used for backing (+20). Parameter OFF/ON Turns the CHORUS OFF/ON. TYPE Use this to choose the type of chorus. MONO This chorus effect outputs the same sound from the left and right channels. ST 1 This is a stereo chorus effect that adds different chorus sounds to L channel and R channel. ST 2 This stereo chorus uses spatial synthesis, with the direct sound output in the left channel and the effect sound output in the right channel. MN MLD This features a more suppressed high end than MONO. ST1 MLD This features a more suppressed high end than ST 1. ST2 MLD This features a more suppressed high end than ST 2. RATE This sets the speed of the effect. When set to BPM, the value of the RATE parameter is set according to the value of the “EFFECT TEMPO” (p. 30) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song. DEPTH This sets the richness of the effect. EFFECT LEVEL This sets the volume level of the effect. CHORUS parameter list REVERB parameter list EZ CHARACTER parameter list Parameter OFF/ON Turns the REVERB OFF/ON. TYPE Use this to choose the type of reverb. AMBI. Simulates an ambience mic (off-mic, placed at a distance from the sound source) used in recording and other applications. Rather than emphasizing the reverberation, this reverb is used to produce a sense of openness and depth. ROOM Simulates the reverberation in a ...
Este manual também é adequado para os modelos :Instrumentos musicais - EBAND JS-8 (61.62 mb)