Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
MIDI messages fed into the device through MIDI IN ! (REMOTE) are sent to each Zone according to the IN 1 (REMOTE) Assign's setting, then are treated as performance messages on the A-70. That is. MID! messages sent to the external Zones wiH be assigned to MIDI OUT 1, 2, 3 and 4 according to the settings of the external Zones, then sent out again on the MIDI channels set in the relevant Zones. The MIDI messages sent to an internal Zone will respond to the Part on the Voice Expansion Board specified in each internal Zone, when the Voice Expansion Board is installed. MIDI message fed through IN 2 will be assigned to the MIDI OUT 1, 2, 3, 4 or INT {Voice Expansion Board) according to the IN 2 Assign’s setting, then sent out again. The explanation here (receive data), however, applies only to the A-70/A-70EX with the Voice Expansion Board VE-RD1 installed. ■ Channel Voice Messages • Note off Status 2nd byte 3rd byte 8nH 9nH kkH kkJH wH 00H O Portamento Time (Controller number 5} Status 2nd byte 3rd byte BnH 05H wH n*MIDI channel number : OH - FH (ch.l - ch.16) w»Portamento Time : 00H - 7FH (0 -127) Initial value » 00H (0) O Data Entry (Controller number 6,38) Status 2nd byte 3rd byte BnH 06H mmH BnH 26H I1H n=MIDl channel number : OH • FH (ch.l - ch.16) mm,ll= the value of the parameter specified by RPN/NRPN mm * upper byte (MSB), I! = lower byte (LSB) O Volume (Controller number 7) Status 2nd byte 3rd bvte BnH 07H wH n«MTDI channel number ; OH - FH(ch.l -ch.16) w-Voiume :OOH-7FH (0-127) Initial value»64H (100) n=MIDi channel number kk»note number w=note off velocity OH - FH (ch.l - ch.16) ООН-7Ж (0-127) ООН-7FH (0-127) О Balance (Controller number 8} Status 2nd byte 3rd bvte • Note on Status 2nd byte 9nH kkH n-MIDl channel number kk=note number w=note on velocity 3rd b vte wH OH - FH (ch.l - ch.16) 00H -7FH (0-127) 01H - 7FH (1 -127) * The Note On/Off message sent to each Zone through the IN 1 (REMOTE), if it is within the Key Range of each Zone, will be transposed, then re-sent on the MIDI channel of die relevant Zone, after calculating the velocity value using the velocity curve, vdocity sensitivity and velocity max. * Each Zone allows the transposition to ±36 semi tones. * Note message transposed exceeding 0-127 range will be converted to the Note message of the closest octave that is out of the range. * Polyphonic Key Pressure Status 2nd byte 3rd byte AnH kkH wH n«MIDi channel number ; OH - FH (ch.1 - ch.16) w=balance :00H-7FH O Pan (Controller number 10) Status 2nd byte 3rd byte BnH 0AH wH n=MIDI channel number w**pan : OH - FH (ch.1 * ch.16) : ООН - 40H • 7FH (Left - Center - Right) Initia! value • 40H (Center) O Expression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH wH n-MIDI channel number : OH - FH (ch.l - ch.16) w-Expression : OOH • 7FH (0 -127) O Hold 1 (Controller number ¿4) Status 2nd byte 3rd byte Initial value * 7FH (127) n=MIDI channel number : OH - FH (ch.l - ch.16) BnH 40H wH kk=note number : 00H-7FH (0-127) w=key pressure : ООН-7FH (0-127) n=MTDI channel number w*ControI value : №1 - FH (ch.l - ch.16) : 00H-7FH (0-127) 0-63=OFF 64-127-ON • Control Change O Portamento (Controller number 65) O Modulation (Controller number 1 Status 2nd byte 3rd byte Status 2nd byte 3rd byte BnH 41H wH BnH 01H wH n=MIDI channel number : OH - FH (dh.l - dh.16) n=MIDl channel number : OH-FH (ch.l-ch.16) w=Control value : 00H-7FH (0-127) 0-63=OFF 64-127=ON wsModulation depth : 00H - 7FH (0 - 127) O Sostenuto (Controller number 66) O Breath type {Controller number 2) Status 2nd byte 3rd byte Status 2nd byte 3rd byte BnH 42H wH BnH 02H wH n=MIDI channel number : OH-FH (ch.l-ch.16) n=MIDI channel number : OH - FH (ch.l - ch.16) w-Control value : 00H - 7FH (0 -127) O-63-OFF 64-127=ON w »Control value : 00H - 7FH (0 - 127) O Soft (Controller number 67) O Foot type (Controller number 4) Status 2nd byte 3rd bvte Status 2nd byte 3rd bvte BnH 43H wH BnH 04H wH n»MIDI channel number : OH -FH(ch.l- ch.16) n*MIDI channel number : OH-FH(ch.l-ch.16) ws=Contro! value : 00H - 7FH (0 - 127) O-63-OFF 64-127=ON w=Control value : 00H-7FH (0-127) 2 O Hold 2 (Controller number 69) Status 2nd byte 3rd bvte BnH 45H vvH n-MJDS channel number : OH - FH (ch.l - ch.16) w«Control value : 00H - 7FH (0 -127) 0-63®OFF 64-127-ON O Portamento control (Controller number 84) Status 2nd byte 3rd byte BnH 54H kkH n=MIDl channel number : OH * FH (ch.l - ch.16) kk=Source note number : OOH - 7FH (0 -127) * This applies to the Zone on the receiving ch. The on-note glides to the pitch of die note turned on next. О Effect 1 {Reverb Send Level) Status 2nd byte 3rd byte BnH 5BH wH (Controller number 91 ) n-MIDI channel number : OH - FH (ch.l - ch.16) w=Reverb send level : OOH - 7FH (0 -127) Initial value = 28H (40) * This message adjusts the Reverb Send Level of each Zone. O Effect 3 (Chorus Send Level) (Controller number 93] Status 2nd byte 3rd b...