Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones. • When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. • Use a provided cable or a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. • Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. 4 5 Attaching to a Stand Attach the CY-12R/C with the optional cymbal mount (MDY series), or drum stand cymbal mount (MDS series). 1. Use a commercially available drum key to tighten the stopper bolt. The stopper keeps the CY-12R/C from turning, and prevents the cables from catching or getting tangled on the stand. fig.01.e 2. Attach the CY-12R/C so the unit is oriented as shown in the diagram (bolt should be opposite the output jacks). 3. Tighten the wing nut to obtain the desired movement. Use the included felt washer and the wing nut. fig.02.e • Double sounding may occur if the wing nut is loose. • Do not use the washer or felt included with the cymbal mount (MDY series). Connecting to a Percussion Sound Module (TD-6, TD-8, TD-10, etc.) About the Output Jacks The CY-12R/C features two different output jacks, BOW/BELL and BOW/EDGE. Use the BOW/BELL output jack when you want to play the bow and the bell sounds; use the BOW/EDGE output jack when you want to play the bow and the edge sounds. Use either the BOW/BELL or BOW/EGDE output jack, but not both at the same time (except for the TD-10 + TDW-1 with V-Cymbal Control). Connecting both jacks results in two separate trigger inputs playing simultaneously. If you are using the TD-10 + TDW-1 with V-Cymbal Control, you can use both the BOW/BELL and BOW/EGDE output jacks at the same time (Three Way Triggering). For more details, refer to “If Using TD-10 + TDW-1 with V-Cymbal Control” (p. 6). Making the Connections To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. 1. Use the included cable to connect one of the CY- 12R/C’s output jacks (either one, but not both, EXCEPT when using with the TD-10 + TDW-1 with V-Cymbal Control installed) to the drum sound module’s trigger input jack. Connect the L-shaped plug of the included cable to the CY-12R/C. This will prevent strain from being applied to the CY-12R/C. To make use of edge shot and choking play techniques, you'll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. The TD-8's “1/2 (KICK 1/2)” and “11/12 (AUX 1/2)” do not support rim shots. 2. Secure the cable with cable ties. Leave enough slack so that the cable is not pulled by any shaking or vibration of the cymbal when it is struck. fig.CY03.e Take care to ensure that the cable does not come into contact with the cymbal or stand. Contact between the cable and the cymbal or stand can result in problems, Stopper (Be sure to orient it correctly) Tighten the bolt with a commercially available drum key Wing Nut Felt Washer Output Jack Corresponding Play Methods Tones Sounded BOW/BELL Bow Shot (p. 6) Head Bell Shot (p. 6) Rim Choke (p. 7) – BOW/EDGE Bow Shot (p. 6) Head Edge Shot (p. 6) Rim Choke (p. 7) – Tighten it not to slip Wind the cable tie twice Secure the cable in place with the cable tie Leave some slack in the cable Turn back to fix the cable Next 6 such as double sounding. 3. Make the trigger settings for the percussion sound module. For the recommended values, refer to p. 2. Should you neglect to make the appropriate settings for the percussion sound module. • Sometimes it does not sound (uneven volume) • The volume is too low (reduced sensitivity) • Double sounding may occur For information on how to change the parameters for a percussion sound module, refer to its owner’s manual. If Using TD-10 + TDW-1 with V-Cymbal Control When you use the TD-10 + TDW-1 V-Cymbal Control, three way triggering is possible. * Three Way Triggering is not available with the TD-8. About Three Way Triggering By using two cables to connect the CY-12R/C and a TD-10, you can then perform using three different tones: bow, bell, and edge. TDW-1 specifications allow the Three Way Triggering function to be used with only one V-Cymbal. For example, if you use the Three Way Triggering function with one CY-15R, you would not be able to use Three Way Triggering if you added another CY-12R/C. Connections/Examples of Settings If you connect a pad or a V-Cymbal ONLY to the trigge...