Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
45) will be turned ON for the patch that is assigned. Editing 127 Editing a Sample A message will ask you for confirmation. 6. Press [8 (Exec)]. The sample will be assigned (as a patch) to the specified part. To cancel, press [7 (Cancel)]. 7. Press [EXIT] to return to the previous screen. If you select another patch, the patch you assigned will be replaced by that patch. If you want to keep the patch you created, press [WRITE] and save it. Create a Rhythm Set (Create Rhythm) Here’s how you can use the sample(s) to create a rhythm set. This operation is called Create Rhythm. When you execute Create Rhythm, the sample(s) will become a rhythm set and will be assigned to a part. For example, you could record a sample, use the Chop function to divide it, and then use this Create Rhythm operation to assign the divided samples to a part as a rhythm set. Alternatively, you can assign a mark to two or more samples in the sample list, and execute Create Rhythm to assign the samples to a part as a rhythm set. 1. Press [SAMPLE LIST] to access the Sample List screen. 2. Select the samples. If you want to select two or more samples, press [5 (Mark Set)] to add a check mark (.) to the samples that you want to select. To remove the check mark, press [4 (Mark Clear)]. You can press [8 (Preview)] to audition the selected sample. 3. Press [7 (Load Utility)], and then press [4 (Create Rhythm)]. The Create Rhythm window will appear. 4. Either turn the VALUE dial or use [INC] [DEC] to select the part that you want to assign. 5. Press [8 (Select)]. A message will ask you for confirmation. To cancel, press [7 (Cancel)]. 6. Press [8 (Exec)] The sample will be assigned (as a patch) to the specified part. To cancel, press [7 (Cancel)]. 7. Press [EXIT] to return to the previous screen. If, from Performance mode, you select and play the part selected in step 4, it will sound as a rhythm set. Since the samples will be assigned consecutively from the C2 key, we recommend that you set Pad Set to User, and set the pad bass note to C2 when playing the part from the pads (p. 136). * If you select another rhythm set, the rhythm set you assigned will be replaced by that rhythm set. If you want to keep the rhythm set, press [WRITE] and save it. * The sounds will be assigned in order starting at the C2 key. Creating a Multisample (Create Multisample) A set of two or more samples assigned to be played from the keyboard is called a “multisample.” A multisample can contain up to 128 splits. The Fantom-S can hold 128 multisamples in user memory and 128 multisamples in a memory card. You can also assign a multisample to a part as a patch. 1. Press [SAMPLE LIST] to access the Sample List screen, and select the sample(s) that you want to include in your new multisample. No.001Multisample sample No.001 No.128Multisample sample No.002 sample No.003 sample No.127 sample No.128 Multisample Number in the sample list A multisample is divided into 128 If, for example, only one note (e.g., the sound of the C4 key) is sampled from a wide-ranging instrument such as a piano, and assigned to the entire range of keys, it will sound unnatural when played significantly below or above its original pitch. If the instrument is sampled at several different pitches and assigned to different ranges of the keyboard, this unnatural effect can be minimized. When you create a multisample, the split points are automatically determined according to the original key of each sample. Before you begin this process, you should set the original key of each sample to the range where you want it to be assigned. A sample will not sound at a pitch higher than one octave above the original key. (128 key) 128 split Multisample sample No.001 original key C3 sample No.002 original key C4 sampleNo.003 ogriginal key C5 : original key split point split point Editing a Sample If you want to select two or more samples from the sample list, press [5 (Mark Set)] to add a check mark (.) to each sample. Pressing [4 (Mark Clear)] will clear the check mark. You can press [8 (Preview)] to audition the selected sample. If the total number of marks exceeds 128, the multisample will be created from the 128 lowest-numbered samples. You cannot create a multisample using samples from more than one bank. 2. Press [7 (Load Utility)], and then press [3 (Create Multi Sample)]. The Create Multisample Name screen will appear. 3. Assign a name. • [1 (Change Type)]: Changes the type of character. Each time you press this you will alternately select the first character of the uppercase alphabet (A), lowercase alphabet (a), and numerals and symbols (0). • [2 (Delete)]: Deletes the character at the cursor, and moves subsequent characters one space forward. • [3 (Insert)]: Inserts a space (blank) at the cursor location. • , : Move the cursor. • , : Switch between uppercase and lowercase letters. • VALUE dial, [INC][DEC]: Select characters. * If you decide to stop inputting the name, press [7 (Cancel)]. * You can use the p...