Assessments - 1, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
will be transmitted. 2. Press the “C6”~“D#7” keys to select the MIDI channel. MIDI features sixteen MIDI channels, numbered 1~16. Simply connecting a cable is not enough for communication to take place. The connected devices must be set to use the same MIDI channels. Otherwise, no sound will be produced, and no sounds can be selected. Note: The HP-1 receives on all channels 1~16. 17 Connecting to MIDI devices 5.2 Switching Local Control on and off When connecting a MIDI sequencer, switch off the Local Control function. As illustrated, information describing what has been played on the keyboard is passed to the internal sound generator over two different routes, (1) and (2). As a result, you hear overlapping or intermittent sounds. To prevent this from happening, route (1) must be severed, by setting the unit to what is known as “Local Off.” MIDI MIDIMIDI MIDI IN IN OUT OUT is sounded twice Thru function On Local On(1) Local On Sequencer (2) THRU function on Memory Each note you play is sounded twice Tone generator Local Control on: The keyboard and the internal sound generator are in a linked state. Local 0n Sound is emittedProduces sound Tone generator Local Control off: The keyboard and the internal sound generator are in an unlinked state. No sound will be produced by the keyboard when it is played. Local 0ff No sound producedTone generator No sound produced When a Roland MT series instrument is connected, it is not necessary to make the Local Off setting. MT units transmit Local Off messages when their power is switched on. If you turn on the power in the order of the HP-1 > MT series, Local Off will be set automatically. 1. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators flash). 2. Press the “B7” or “C8” key to set the Local function. (See p. 17 for the exact location of these keys.) Press the “B7” key to switch the Local function off. Press the “C8” key (the rightmost key) to switch the function back on again. –6. Connecting audio equipment 6. Connecting audio equipment ENGLISH You can connect audio devices to play the sound of the HP-1 through the speakers of your audio system, or to record your performance on a tape recorder or other recording device. When connecting, please use an audio cable with a standard phone plug (sold separately). Connection examples To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Playing the sound of the HP-1 through the speakers of an audio system/Recording the performance of the HP-1 on a recording device Input R/L (Line In, Aux In) HP-1 Use the following procedure when turning on the power: 1. Turn on the power of the HP-1. 2. Turn on the power of the connected device. 3. Adjust the volume of each device. When recording HP-1 performances with a cassette deck, etc. 4. Start recording on the connected device. 5. Perform on the HP-1. 6. When the performance ends, stop recording on the connected equipment. Playing the sound of an audio device through the speakers of the HP-1 Turning off the power 1. Set the volume of the HP-1 and of the connected devices to the minimum position. 2. Turn off the power to the HP-1. 3. Turn off the connected equipment. Connecting to a computer You can use a USB>MIDI interface cable (sold sepa rately) to connect the HP-1 to your computer. If the HP-1 is connected to a computer running sequencer software such as Roland’s “Visual MT”, you can record your music. Connection examples • To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. • In order to make connections to your computer, you must install MIDI driver software on your computer. For details, refer to the owner’s manual for your MIDI interface. Use a USB MIDI interface cable to connect the USB port of your computer to the MIDI connectors of the HP-1. MIDI INMIDI OUT USB Connector of your Computer USB on your computer Computer UM-1, etc. HP-1 Output R/L (Line Out, Aux Out) HP-1 Use the following procedure when turning on the power. 1. Turn on the power of the connected device. 2. Turn on the power of the HP-1. 3. Adjust the volume of each device. 19 7. Appendix 7. Appendix 7.1 Troubleshooting If you are encountering problems with the HP-1, please read the section below before assuming that there is a malfunction. The piano cannot be switched on Is the power cord properly connected? (p. 7) No sound is produced Is the volume knob set to the minimum position? (p. 8) Are headphones connected? (p. 8) Did you switch off the Local function? (p. 18) The pitch of the keyboard sounds incorrect Is the Master Tuning setting correct? (p. 13) Is the Transpose setting correct? (p. 12) Did you select another temperament? (p. 14) Bass notes sound wrong/buzzing or vibration occurs If you can’t hear the problem in the headphones: When playing at high v...