Log:
Assessments - , GPA: ( )

Instruções de Operação Roland, Modelo KC-150

Fabricante : Roland
Arquivo Tamanho: 717.73 kb
Arquivo Nome :

Língua de Ensino: en

O documento está colocado, por favor, espere
O documento está colocado, por favor, espere


por este dispositivo também tem outras instruções :

Facilidade de uso


The SUBWOOFER OUT output is also changed. When connecting headphones, adjust the headphone volume level. * The VOLUME knob do not affect the line outs. 7. PHONES Jack This is for connecting headphones. The unit's speakers are deactivated when headphones are plugged in. Also, no signals are output from SUBWOOFER OUT (p. 7). * Always be sure to lower the VOLUME knob to 0 whenever connecting and disconnecting headphones. * Although the PHONES jack accepts stereo plugs, the audio output is mono. 6 8. Power Indicator This indicator illuminates when the power is on. 9. POWER Switch This switches the power on and off. * Always be sure to lower the volume on the KC-150 and any connected equipment to 0 whenever turning the power on or off. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally. Slight pop noise may come from the speakers when the power is switched on, but this does not indicate a problem. * Refer to p. 9 for the order in which to turn the power to connected devices on and off. 10.AUX IN Jacks These are RCA phono type input jacks. You use these to connect equipment such as CD and MD players, and have them sound along with the equipment connected to channel 1 through channel 4. They accept level input of -10 dBu. * To adjust the volume level of equipment connected to the AUX IN jacks, use the controls on such equipment. * Even though the input signal may be in stereo, the signal is mixed internally to a mono signal. 11. LINE OUT Jack Connect mixers, recorders, and other such equipment here. This output jack provides +4 dBu line level output. * The MASTER CONTROL knobs (the LOW, HIGH, and VOLUME controls) do not affect the output from LINE OUT. The signal that is input to CH 4 will not be output. 12.SUBWOOFER OUT Jack This lets you play even more powerful bass by connecting a powered subwoofer. Provides full-range output, at an output level of +4 dBu. You can use the MASTER CONTROL knobs (LOW, HIGH, and VOLUME) to adjust the tone and volume level of the signals output from SUBWOOFER OUT. * No signals are output from SUBWOOFER OUT when headphones are connected. | Making the Connections Refer to the figure shown below to connect the KC-150 and the other equipment. Control Panel Rear Panel SUBWOOFER out] 1 UNE OUT j[ AUXIN If CH 4 II CH3~I| CH 2 1i CH1 I R L HHilH.lil UNE UNE MIC/UNE +4dBu +4dBu -10dBu -20dBu -20

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias