Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
When it is set to "PRE”, the signal is sent before the Channel Fader, and therefore can be used for monitoring. When it is set to ’’POST", the signal is sent after the Channel Fader, and therefore can be used for effect send. ©Effect Send Cue Switch This sends the effect signal to the Headphones or Cue Out. ©AUX Send Cue Switch This switch sends AUX signal to the headphones or Cue Out. *The signal is sent to the Headphones or Cue Out before the AUX Send Volume. ©Monitor Send Cue Switch This switch sends monitor signal to the Headphones or Cue Out. *The signal is sent to the Headphones or Cue Out before the Monitor Send Volume. ©Cue Indicator This lights in red when more than one Cue Switch is pressed down. ©Headphones/Cue Volume Control This controls the volume of the Headphones or Cue Out. ©Headphones Socket Provides connection for stereo headphones. Normally, the signal from each Channel Fader is mixed and output, but when the Cue Switch is pressed down, only the cue signal is output. ©Power Indicator This lights up when the unit is switched on. *The signal is sent to the Headphones or Cue Out before the Effect Send Volume. 3. Rear Panel □ ® (2) © © ' JL *■ »ft ^ W W ^ 'Él it* w ô ɧ lH* .... TttS-6 Stt ôèoôôoôè Ô © DOOOOO - o ô 6 6 o 6 6 6 ¿66 ÔOÔ ÔÔI6ÔÔÔÔÔÔÔ