Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
Recording Your Performance Parts Separately You can use the MP-70’s recorder to record the right-hand and left-hand parts separately. You can also specify individual parts to record to when you want to do a recording over again. Press the [LEFT] or [RIGHT] button to specify the part to be recorded. As described in steps 1 and 2 of “Recording a New Song” (p. 26), select “USr” before you continue. When layering recordings with internal songs, select the internal song as described in steps 1 and 2 of “Selecting a Song and Playing It” (p. 11). 1 As necessary, turn on the metronome (p. 21). 2 Press the [REC] button. The [REC] button’s indicator will light. The indicator on the button for the part to which a performance has been recorded will light. The indicator on the button for the part which is about to be recorded will flash. Selecting the track to record 3 Press the [LEFT] or [RIGHT] button to select the track that you want to record. The indicator of the button you pressed will blink, and the MP-70 enters recording- standby mode. Start recording 4 Press the [PLAY] button. Two measures of the count sound are played, and the recording begins. Go ahead and perform on the keyboard. Note that recording will also begin as soon as you play anything on the keyboard, even if you do not press the [PLAY] button. There is no count sound played when you start in this manner. Left-hand Part Right-hand Part 34,5,6 2,5 1 NOTE If you layer on a newly recorded performance without erasing the recorded song, the song tempo, beat, and metronome settings of the original recording will be stored along with the new recording. The track buttons allow you to record to either the [LEFT] or the [RIGHT] button, one at a time. Chapter 4. Recording Your Performance Chapter 4. Recording Your Performance 5 Press the [PLAY] or [REC] button. Recording stops, and the indicators for the [PLAY] and [REC] buttons go out. The performance of the specified part has been recorded. To record the performance of the other part, go back to Step 2 and repeat the procedure from there. You can listen to the performance you recorded already while you record. Play back the recorded performance 6 Press the [PLAY] button. You will hear the recorded performance. Press the [PLAY] button once again, and playback will stop. Chapter 4. Recording Your Performance 1 1 Chapter 4. Recording Your Performance 1 1 Chapter 4. Recording Your Performance Power Turned Off (Song Backup) Normally, any songs you have recorded are deleted when you turn off the power to the MP-70. However, if you wish, you can have such recorded songs be saved even while the power is turned off. This function is called “Song Backup.” 1 Hold down the [SPLIT] button, and press the [TWIN PIANO] button. The MP-70 switches to the function mode. 2 Press the [SONG/TEMPO] button. The button’s indicator flashes. The following appears in the display. 3 Press the [REC] button. The display flashes, and Song Backup is executed. When Song Backup is finished, the display and buttons return to their normal appearance. ¦ Deleting backed up songs * You can delete backed up songs only when you have no songs recorded. 1 Hold down the [SPLIT] button, and press the [TWIN PIANO] button. The MP-70 switches to the function mode. 2 Press the [SONG/TEMPO] button. The following appears in the display. To cancel the procedure, press the [SPLIT] button or the [TWIN PIANO] button. 3 Press the [REC] button. The backed up song is deleted. The display and buttons return to their normal appearance. 1 2 Chapter 4. Recording Your Performance Power Turned Off (Song Backup) Normally, any songs you have recorded are deleted when you turn off the power to the MP-70. However, if you wish, you can have such recorded songs be saved even while the power is turned off. This function is called “Song Backup.” 1 Hold down the [SPLIT] button, and press the [TWIN PIANO] button. The MP-70 switches to the function mode. 2 Press the [SONG/TEMPO] button. The button’s indicator flashes. The following appears in the display. 3 Press the [REC] button. The display flashes, and Song Backup is executed. When Song Backup is finished, the display and buttons return to their normal appearance. ¦ Deleting backed up songs * You can delete backed up songs only when you have no songs recorded. 1 Hold down the [SPLIT] button, and press the [TWIN PIANO] button. The MP-70 switches to the function mode. 2 Press the [SONG/TEMPO] button. The following appears in the display. To cancel the procedure, press the [SPLIT] button or the [TWIN PIANO] button. 3 Press the [REC] button. The backed up song is deleted. The display and buttons return to their normal appearance. 1 2 3 You can select and play songs that have been backed up in the same way as you do with the internal songs (p. 11). Songs that have been backed up are indicated in the display as shown below. Chapter 5. Changing Various Settings Pedal’s Resonance Chapter 5. Changing Various Settings Pedal’s Resonance On ...