Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Rotating the knob clockwise boosts the level of the middle frequencies, while rotating it counterclockwise cuts the level of the middle frequencies. ® Middle Frequency Control Knob This knob sets the frequency of the middle range ( 200Hz to 5kHz ). Rotating the knob clockwise raises the frequency. Rotating it counterclockwise lowers the frequency. ♦ When the Middle Level Control Knob is set to the center position, the Middle Frequency Control Knob does not affect the sound. ® Input Jack Connect an electric or electronic musical instrument ( such as an electric guitar ) to this jack, ♦ Inserting a plug into this jack will automatically switch the unit on. Be sure to disconnect the plug from this jack when the unit is not being used. r ■ CONNECTIONS Connect the AC Adaptor AC Adaptor: BOSS PSA-120, 220 or 240 (option) ♦ Inserting a plug into the Input Jack will automatically switch the unit on. ♦ Before connecting or disconnecting a plug, make sure that the volume of the amplifier is turned down. ■ SAMPLE SETTINGS Heavy Metal Hard Rock CHECK LEVEL EQUALIZER DIST Overdrive CHECK LEVEL EQUALIZER DIST MIN MAX -15 +15 200 5k MIN MAX HIGH middle-5) I—LOW MID FREQ-J Fuzz CHECK LEVEL EQUALIZER DIST MIN MAX -15 +15 200 5k MIN MAX Ä-HIGH MIDDLE—5) ^—LOW MID FBEQ-J British Rock Rock'n’roll f CHECK • f CHECK 1 • 0@@0 • 1 I • 1 • 1 • 0@©0 • ••••••# MIN MAX -15 +15 200 5k MIN MAX HIGH MIDDLE—S) •—LOW MID FREQ-J MIN MAX -15 +15 200 5k MIN MAX 0—HIGH MIDDLE—® I—LOW MID FREQ-J Rock 1 Rock 2 ( CHECK 1 t r CHECK • o@@o • ••••••• o © @ 0 • ••••••• MIN MAX -15 +15 200 5k MIN MAX (g-HIGH MIDDLE—5) L—LOW MID FREQ-J MIN MAX -15 +15 200 5k MIN MAX HIGH MIDDLE—0 >—LOW MID FREQ—' ■ OPERATION........................ U) Make all the necessary connections, then set the controls on the panel as shown below. CHECK 0 IEVEL EQUALIZER DIST HIGH MIDDLE—-3) -LOW MID FflEO~J (6) Adjust the tone of the high range with the High Level Control Knob 0 ■ Rotating the knob clockwise boosts the higher frequencies while rotating it counterclockwise cuts them. (2) Press the Pedal Switch 0 , Make sure the Check Indicator lights. (?) Adjust the tone ot the low range with the Low Level Control Knob 0 . Rotating the knob clockwise boosts the lower frequencies while rotating it counterclockwise cuts them. f CHECK • CHECK } • LEVEt EQUALIZER DIST O©0O LEVEL EQUALIZER DIST OÛÛO MIN MAI -15 »15 200 SU MIN MA* ft—HIGH MIDDLE—5) L—LOW MID FREQ—^ MIN MAJ -'5 ‘15 200 5b MW MAI HIGH MIDDLE—S —LOW MID FREO -T 'D Adjust the level of distortion using the Distortion Control Knob @ . Rotating the knob clockwise increases the distortion level while rotating it counterclockwise decreases It. * It this knob Is set too high, the noise will increase and oscillation may occur. (D Using the Level Control Knob @ , adjust the volume of the effect sound so that there will be no difference in volume between the effect and straight sounds. ;T) Adjust the tone of the middle range with Ihe Middle Level Control Knob ® , Rotating the knob clockwise boosts the frequency while rotating it counterclockwise cuts it (5) Set the middle frequency ( to be boosted or cut) with the Middle Frequency Knob