Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
This makes it possible to reduce the noise of each effect unit whether it is turned on or off Different from the past noise suppressing system, the NS-2 features a high-quality VGA and high-speed envelope-detecting circuits, and the expander starts its function when the volume of the instrument becomes lower than the threshold level. Therefore, natural noise reducing effect is obtained without deteriorating the sound quality and expression. The NS-2 works as a noise-gate unit, cutting the noise and hum that occur between song intervals or at break. You can use the Pedal Switch effectively as a mute-switch when tuning or changing guitars, as well as for a Normal/ Effect switch. The 9V DC OUT Jack is provided to connect to the optional Parallel DC Cord (PCS-20A) for supplying power to the other 9V effect units. NS-2 Noise Suppressor CONNECTIONS 0 0 0,0 Do not connect delay or reverb effects between (tie Send and Return Connect them between ihe NS-2 and an amplifier Digital Delay Delay Parallel DC Cord AC Adaptor Jack Output Tuner Input OÓÓ© oooo ^•oumn input 4- Comprassion Sustainer cs-3 Dynamic Filter FT-2 Connect to the 9V DC Out Jack Effect Units AC Adaptor BOSS PSA Series Coned to the 9V DC IN Jack <\ OUTPUT INPUT Jl <-SEND RETURN <- Noise Suppressor NS-2 PIEPER Guitar Bass Guitar ! iiiiiiiiiiiiiiriiiinriii Keyboard Plugging in the Input Jack Automatically turns on the Unit When the uni! is not to be used, be sure to disconnect the connection cord from the Input Jack Setup with the Multiple Effects Guitar Amplifier Input Jack o o Send Jack Output Jack Return Jack OUTPUT INPUT 4* f*S£ND WETUR#<- Nois* Suppressor NS-2 ... - n Ü o n U. U. — .... ” ” □ AC Adaptor BOSS PSA Series Guitar When the unit is not to be used, be sure to disconnect the connection cord from the Input Jack OPERATION iT) Make all the necessary connections " You can also set up the NS-2 at the end of the othet effects. bt.it the example setup may be more effective (2) Set the controls on the panel as shown below C.HEGK/MLTE ■■■91l THRESHOLD WtCAY REDUCTION (3) Push the Pedal Switch and make sure the Check Indicator lights up. * When the Check Indicator is lit. Noise Reduction is On and when it is dark. Normal CHECK/MUTE O © Turn on the effect device to be used, then set the Threshold Knob so that the Reduction Indicator will light while not playing arid the noise will not be heard. * Try making the decay toward the end sound natural. THRESHOLD (5) Normally, set (he Decay Knob to the MIN position, but if the sound does not fade out naturally, rotate it clockwise. DECAY © Set the Mode Selector Switch to REDUCTION or MUTE 4 REDUCTION position allows you to select Normal or Reduction, and the MUTE position allows you to keep Reduction on and use Mute occasionally MUl :tioni iJ REDUCTION -For EU Countries—v f £ This product complies with the requirements of J V, Vi European Directive 89/336/EEC._j PANEL DESCRIPTION o 9V DC OUT Jack When an AC adaptor is connected to the 9V DC IN Jack and a Parallel DC Cord PCS-20A is connected to this 9V DC OUT Jack, power supply to the other 9V effect devices is possible. * When being operated on battery, the unit cannot supply power to the connected device. * When using the PSA Adaptor, be sure the total ament diew does not exceed 200mA, and when using the RPW-7, 700mA * Polarity r 0 CHECK/MUTE Indicator This indicator lights when the effect {Noise (eduction or Mute whichever selected) is on * This indicator also serves as battery check. When it becomes dimmet or does not light at ail, battery replacement is reguired 0 THRESHOLD Knob This sets the threshold level where the noise suppression starts working. Adjust it depending on the signal level and noise level, and when too low, counterclockwise. 0 REDUCTION Indicator This indicator is lit when the noise reduction function is being engaged. 0 OUTPUT Jack This is to connect to an amplifier 0 SEND Jack Through this jack, the input signal is seni to external effect devices. 0 9V DC IN Jack This is to connect to an AC adaptor (BOSS PSA 120, 220 or 240) or the Power Supply (BOSS RPW-7). For long and secure operation, use an AC adaptor 9V DC Out Jack Check/Mute Indicator 0-Threshold Knob < Reduction Indicator 0- Output Jack 0- Send Jack 0— 1 4-output input 4* SEND RETURN f- Noise Suppressor NS-2 4} 9V DC In Jack © Decay Knob -0 Mode Selector Switch -4£> Input Jack Return Jack -0 Pedal Switch 0 Thumb Screw o DECAY Knob This sets the time needed for the sound to fade out when the input signal becomes lower than the set threshold level Rotating it clockwise makes the decay time longer. Normally, set this to the MIN position Q MODE Selector Switch This selects the Reduction or Mute mode CHECK MUTE \-4NDICAT0R Dark Light (OFF] (ON) MODE REDUCTION Normal Reduction MUTE Reduction Mute on ® INPUT J...