Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
The way in which you read the manuals will depend on your setup. With the S-760 (Ver.1), two manuals are included: "Basic Operation" and "Advanced Operation*. With the S-760 Ver.2, (he above two manuals and an additional manual titled "S-760 Ver.2/OP-760-1" are included. With the OP-760-1, one manual is included: "S-760 Ver.2/OP-760-1" . These manuals contain the following contents. [Basic Operation] This manual explains basic ideas and operation of the S-760 Ver.1. It explains how to operate the unit using its LCD display and the front panel buttons. [Advanced Operation] This manual explains more advanced uses, such as how to edit S-760 Ver.1 sounds. It explains how to operate the unit using its LCD display and the front panel buttons. [S-760 Ver.2 / OP-760-1] This manual explains the functions and parameters which were added/modified in S-760 System Software Ver.2, and the functions and operation of the OP-760-1 which is available as an option for the S-760. Refer to this manual for how to operate the unit using a CRT display and mouse. Caution! The functions of the OP-760-1 are available only when the S-760 is started up using S-760 System Software Ver.2. If you start up using Ver.1, you will not be able to use the OP-760-1 even if it is installed. Note the following points applicable to your system, and read the appropriate sections of each manual. ■ If you upgraded from Ver.1 to Ver.2 Start up the S-760 using the Ver.2 system disk. You will be able to use the functions of S-760 System Software Ver.2, but the functions of the OP-760-1 will not be available. ■ If you previously owned an S-760 (Ver.1) and newly purchased an OP-760-1 Start up the S-760 using the system disk (Ver.2) included with the OP-760-1. You will be able to use all the functions of S-760 System Software Ver.2 and the OP-760-1. Refer to "S-760 Ver.2/OP-760-1". ■ If you purchased an S-760 (Ver.1) and an OP-760-1 together Start up the S-760 using the system disk (Ver.2) included with the OP-760-1. You will be able to use all the functions of S-760 System Software Ver.2 and the OP-760-1. Refer to "Basic Operation" and "S-760 Ver.2/OP-760-1." As necessary, refer to "Advanced Operation." ■ If you purchased an S-760 Ver.2 by itself Refer to "Basic Operation" and "S-760 Ver.2/OP-760-1." As necessary, refer to "Advanced Operation." You will be able to use the functions of S-760 System Software Ver.2, but not the functions of the OP-760-1. ■ If you purchased an S-760 Ver.2 and an OP-760-1 together Refer to "Basic Operation" and "S-760 Ver.2/OP-760-1." As necessary, refer to "Advanced Operation." The system disk for the S-760 Ver.2 and the system disk (Ver.2) included with the OP-760-1 are identical. You may use either of them to start up the S-760. You will be able to use all the functions of the S-760 System Software Ver.2 and the OP-760-1. ■ If you previously owned an S-760 Ver.2 and newly purchased an OP-760-1 Refer to "S-760 Ver.2/OP-760-1." The system disk for the S-760 Ver.2 and the system disk (Ver.2) included with the OP-760-1 are identical. You may use either of them to start up the S-760. You will be able to use all the functions of the S-760 System Software Ver.2 and the OP-760-1. 00452890 •96-7-A3-1AS(T) 1 Please be aware of the following points as well. ■ Start up / shut down procedure Start up using the system disk (Ver.2). To start up/shut down, refer to "Starting up and shutting down' (Basic Operation p.1 -6). If you wish to start up from a hard disk rather than from a floppy disk, refer to "Starting up from a hard disk" (Basic Operation p.5-1). Ver.1 users should refer to the following item "How to upgrade from Ver.1 to Ver.2.' If you have installed an OP-760-1 and wish to use a CRT and mouse, make connections before startup (Ver.2 p.2-3). For details on how to switch to CRT display and mouse operation, refer to "Operation using the CRT display and mouse / RC-100" (Ver.2 p.3-1). ■ Backing up the system disk The system disk (Ver.2) is very important, and you should make a backup and keep the original disk in a safe place. For details refer to "Backing up the System Disk" (Basic Operation p.1 -8). ■ Attention S-760 Ver.1 users • How to upgrade from Ver. 1 to Ver.2 If you start up using the Ver.2 system disk, you will be able to use the functions of S-760 System Software Ver.2. However the system program and system parameters are always saved together. If when you were using the Ver.1 system disk you modified the system parameters from their factory settings and then saved them, the system parameters will return to their factory settings when you start up using the Ver.2 system disk. For details on upgrading, refer to "Upgrading to a new version of the system" (Advanced Operation p.6-6). There are two types of system parameters, so also refer to "Loading/Saving the system" (Basic Operation p.8-7). Caution! The display screen structure differs between Ver.1 and Ver.2. For this reason, scree...