Assessments - 2, GPA: 4.5 ( )

Fabricante : Roland Arquivo Tamanho: 266.9 kb Arquivo Nome : Língua de Ensino:

The [Tone] button indicator blinks, indicating the tone selected with the pressed key. Playing the Keyboard Tone While holding down... Press 2. After releasing the button, play the keyboard. The button indicator stops blinking and stays on, indicating that the tone selected in Step 1 has been assigned to the [Tone] button. When assigning tones to the [Tone] button, the tone is set by first selecting the tone in Step 1 (indicator blinks), then playing the keyboard in Step 2 (indicator is lit). You can also set the tone by pressing the blinking [Tone] button instead of playing the keyboard. If you don’t want to set the tone, then press the [Piano] button. Layering Two Instrument Sounds— Dual Play Playing with two different tones on the keyboard simultaneously is called “Dual Play.” Layering the Piano tones and Strings tones 1. First, assign the Strings tone to the [Tone] button. Tone Release the button and play the keyboard. Playing the keyboard sets the assigned tone. PressWhile holding down... Playing the Keyboard 2. While holding down the [Piano] button, press the [Tone] button. Piano Tone While holding down... Press Both button indicators are lit. When you play the keyboard, both the Piano and Strings tones are layered. Reverting to a Single Instrument Tone Press either the [Piano] button or the [Tone] button. Only the button indicator for the button that was pressed stays on, and only that instrument sound is produced. Piano Tone or Press Press Layering the Harpsichord and Strings Tones You can perform with two tones assigned to the [Tone] button layered together (other than the piano tone). While holding down the [Tone] button, simultaneously press the Harpsichord and Strings keys from among the keys marked as “Tone” keys. Tone While holding down... Press simultaneously NOTE Tones composed of two separate layered tones (“Dual” tones) cannot be assigned to the [Tone] button. When the [Tone] button is pressed, the single previously assigned tone is restored. You can adjust the volume balance between the two selected tones in Dual Play. Please refer to “Changing the Volume Balance in Dual Play” (p. 16). Playing the Keyboard Adding Reverberation to the Sound — Reverb Effect The pt-2000 allows you to add reverberation to what you play on the keyboard. With the reverb effect, you can get a pleasant reverberation, making it sound as if you were performing in a concert hall or similar space. 1. Press the [Reverb] button; the button indicator lights. Reverberation is added to the sound. Reverb Reverb Press lit 2. Press the [Reverb] button once more; the button indicator goes off, and the reverb effect is no longer added to the sound. Reverb Reverb Press dark Changing the Reverb Type The pt-2000 features eight reverb types, 1-8, allowing you to select the preferred reverb sound. The higher the reverb type number, the deeper the effect is. The reverb is reset to type 4 when the power is switched on. To change the reverb type, hold down the [Key Touch/Demo Song] button and press one of the keys C3-G3 (corresponding to reverb types 1-8). Selecting Reverb Type 6 While holding down the [Key Touch/Demo Song] button, press the F3 key (the fourth white key below Middle C). Refer to “Functions Assigned to the Keyboard” (p. 23). Demo SongKey Touch / F3C3 G3 1 3 5 6 8 742 While holding down... Press Playing the Keyboard Changing Keyboard Touch Sensitivity You can select from three touch sensitivity levels: Light, Medium, and Heavy. When the Keyboard is turned on, the response is set to “Medium.” While holding down the [Key Touch/Demo Song] button, press the key indicating the preferred touch sensitivity. Demo SongKey Touch / While holding down... Press Types Meaning Medium Normal setting, providing the most natural touch, closest to that of an acoustic piano. Heavy With this setting, to play fortissimo the keys must be played much more strongly than normally, as if the keys had become heavier. Adds even more emotion when you play with lots of dynamics. This is useful for players who use a strong touch and for drill work. Light With this setting, fortissimo can be produced using much less force than normal, thus making the keys seem lighter. This setting makes it easy to play, even for children. It Even Does This! — Convenient Functions It Even Does This! — Convenient Functions Transposing without Changing Your Fingering— Key Transpose You can play in a different key-without changing the keys you are playing. This function is called “Key Transpose.” When you are accompanying a singer, you can use Key Transpose to match the vocal pitch of the singer, allowing you to transpose easily while using the same printed music (keyboard fingering). Key transpositions remain in effect until the keyboard’s power is turned off. * The transposition setting is effective only on sounds performed on the pt-2000’s keyboard. This setting is not effective on tones from external MIDI messages played on the pt-2000. Using the C Major K...

Baixe o seu

Para fazer o download, introduza 2 dígitos :