Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
When set to Omni Off, the pt-2700 will recognize only the messages that arrive on the MIDI channel that has been selected, as explained under “Set the MIDI Channel.” ¦ Switching Omni On/Off Omni On is automatically set when the power is switched on. Hold down the [GRAND PIANO] button, the [UPRIGHT PIANO] button, and the [STRINGS] button, and press the “F4” note to turn the setting On, or the “G4” note to turn the setting Off. Omni OffOmni On Set the MIDI Channel MIDI features sixteen MIDI channels, numbered 1–16. The connected devices must be set to use the same MIDI channels, otherwise no sound will be produced. -In a setup where you wish to play the pt-2700 and also have another MIDI-equipped instrument or sound module play the same notes, you should first set the channel used for reception on your external device to the same channel that you have the pt-2700 set to use for transmission. -If using another MIDI keyboard as a master instrument, and you wish to have the pt-2700 played by it, you would need to set the channel used for reception on the pt-2700 to the same channel that the master keyboard will be transmitting on. -When wishing to have a sequencer play the pt-2700, you need to set the channel used or reception on the pt-2700 to the same channel that the recorded MIDI data is set to use. When the pt-2700 is turned on, Channel “1” is selected. While holding down the [GRAND PIANO], [UPRIGHT PIANO], and [STRINGS] buttons, press the appropriate key (C2–D4) on the keyboard. The MIDI transmit channel and receive channel will switch to the number that corresponds to the note you pressed. 1 23 45 6 78 9 10 11 12 13 14 15 16 MIDI channel Connecting to MIDI Devices Transmitting/Receiving Sound Selection Data— Program Change Program Changes are messages that tell an instrument to “switch to sound number x.” When the other device receives this message, it will switch to whichever of its sounds corresponds to the number contained in the message. When you press the pt-2700’s TONE button to change tones, a Program Change message with the corresponding Program Number is sent via the MIDI Out connector. Furthermore, a Program Change message received via the MIDI In connector changes the tone to the one with the corresponding Program Number. Each time the power is turned on, the instrument will always be set to “On” (it will transmit/receive Program Change messages). If you set it to “Off,” the pt-2700 will no longer send out Program Change message when you change the tone being used. Also, the pt-2700 will then ignore any Program Change messages when that are sent to it by an external unit, and will not change the tone it is playing. While holding down the [GRAND PIANO] button, [UPRIGHT PIANO] button, and [STRINGS] button, press the “E5” note to turn the setting On, or the “F5” note to turn the setting Off. The tones and their corresponding Program Number appear below: Program Tone Number 01 GRAND PIANO 02 UPRIGHT PIANO 03 — 04 HARPSICHORD 05 CHOIR 06 E.PIANO 1 07 E.PIANO 2 08 PIPE ORGAN 09 STRINGS 10 GRAND PIANO + UPRIGHT PIANO 11 GRAND PIANO + HARPSICHORD 12 GRAND PIANO + CHOIR 13 GRAND PIANO + E.PIANO 1 14 GRAND PIANO + E.PIANO 2 15 GRAND PIANO + PIPE ORGAN 16 GRAND PIANO + STRINGS 17 UPRIGHT PIANO + HARPSICHORD 18 UPRIGHT PIANO + CHOIR 19 UPRIGHT PIANO + E.PIANO 1 20 UPRIGHT PIANO + E.PIANO 2 21 UPRIGHT PIANO + PIPE ORGAN 22 UPRIGHT PIANO + STRINGS 23 HARPSICHORD + CHOIR 24 HARPSICHORD + E.PIANO 1 25 HARPSICHORD + E.PIANO 2 26 HARPSICHORD + PIPE ORGAN 27 HARPSICHORD + STRINGS 28 29 30 31 32 33 34 35 36OffOn CHOIR + E.PIANO 1 CHOIR + E.PIANO 2 CHOIR + PIPE ORGAN CHOIR + STRINGS E.PIANO 1 + E.PIANO 2 E.PIANO 1 + PIPE ORGAN E.PIANO 1 + STRINGS E.PIANO 2 + PIPE ORGAN E.PIANO 2 + STRINGS 37 PIPE ORGAN + STRINGS 38 ACOUSTIC BASS / GRAND PIANO 39 ACOUSTIC BASS / UPRIGHT PIANO 40 STRINGS / HARPSICHORD 41 PIPE ORGAN / CHOIR 42 ACOUSTIC BASS / E.PIANO 1 43 ACOUSTIC BASS / E.PIANO 2 44 PIPE ORGAN / HARPSICHORD 45 STRINGS / GRAND PIANO Connecting to MIDI Devices Turning Transmission and Reception of Control Changes On/Off Messages known as “Control Changes” are used to convey to another device information about the instances where you have pressed a pedal, or have turned On/Off the Chorus or Reverb effects. Each time the power is turned on, the instrument will always be set to “On” (it will transmit/receive all Control Change messages). If you set it to “Off” the pt-2700 will no longer send or receive any Control Change messages. While holding down the [GRAND PIANO] button, [UPRIGHT PIANO] button, and [STRINGS] button, press the “A5” note to turn the setting On, or the “B5” note to turn the setting Off. OffOn If you want to know more about Control Change Number, please refer to “MIDI Implementation Chart” (p. 39). Transmitting Performance Data from MIDI Out If this setting is left “On,” performance data recorded on the pt-2700 can be transmitted from the MIDI Out connector. Each time the power is turned on, this setting ...