Instruções de Operação Roland, Modelo R-09HR
Fabricante : Roland Arquivo Tamanho: 7.42 mb Arquivo Nome : Língua de Ensino:
Ir para baixar
por este dispositivo também tem outras instruções :
Facilidade de uso
• If a microphone or other device is connected to the [LINE IN Jack] or [MIC Input Jack], the [Internal Mic] cannot be used. When using the [Internal MIC], do not connect anything to the [MIC Jack] or [LINE IN Jack]. Set monitoring on when recording to monitor the sound through headphones while recording. . “Setting whether to monitor sound while recording” (p. 100) fig.power-onoff-e.eps_80 1. Turn on power to the R-09HR. Turn on power to the R-09HR. See “Turning power on/off” (p. 20) Recording instruments and voice Using the internal microphones L R Hold down Recording Recording Set the sampling frequency. “Configuring recording” (p. 34) 1. Show the
. Press the [MENU Button] to show the . 2. Select “Recorder Setup.” Use the [PLAY Button ] and [STOP Button ] to select “Recorder Setup,” then press the [REC Button]. 3. Select the sampling frequency (Sample Rate). Use the [PREV button ] and [NEXT button ] to change the Sample Rate value. Sampling frequency values 44.1 kHz 48 kHz 88.2 kHz 96 kHz Show Move the cursor up or down Enter Changes the value Recording Recording ] to move 2. Select the recording mode. Use the [PREV button ] and [NEXT button the Rec Mode value. ] to change Recording mode MP3 64 kbps MP3 96 kbps MP3 128 kbps MP3 160 kbps MP3 192 kbps MP3 224 kbps MP3 320 kbps WAV 16 bit WAV 24 bit Move the cursor up or down Change the value MP3 cannot be selected when the sampling frequency is 88.2 kHz or 96 kHz. 4. Press the [MENU Button] twice to return to the . 5. Adjust the input level. Adjust the volume for the recorded sound. Follow the procedures in “Adjusting recording levels” (p. 45) to adjust the level. Press twice Show Recording Recording Press the [REC Button] to begin recording. Press the [REC Button] in recording-standby mode (while the [REC Indicator] is blinking). The [REC Indicator] lights up, and recording begins. • Recording can also be started by pressing the [PLAY/PAUSE Button ]. • If you slide the HOLD switch to the ON position after starting a recording, the recording will not stop nor will the recording level change even if a button is accidentally pressed. • If a microphone or other device is connected to the [LINE IN Jack] or [MIC Input Jack], the [Internal Mic] cannot be used. When using the [Internal MIC], do not connect anything to the [MIC Jack] or [LINE IN Jack]. • If the [Input Level Button] is used in recording-standby mode or during recording, the input level will change. Be careful to not mistakenly use the [Input Level Button]. • Power cannot be turned off during recording. First stop the recording, then turn off the power. 7. Press the [STOP Button ] to stop recording. The [REC Indicator] goes out. Press the [PLAY/PAUSE Button ] to pause. Press the [PLAY/PAUSE Button ] again to cancel the pause and restart recording. The display shows the recorded song. • The song name is automatically created, e.g., R09_0001.WAV. The four-digit number fo... Este manual também é adequado para os modelos :Jogadores - R-09HR (7.42 mb)Jogadores - R-09HR (7.42 mb)
Escreva a sua própria avaliação do dispositivo
