Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
The RP201 will receive all sixteen channels (1–16). 1. Hold down the [Song] button and press the [Metronome] button. The display will indicate “Fnc” and you’ll be in Function mode. 2. Press and hold the [Others] button and use the [–] or [+] button to select “Ch.” 3. Release the [Others] button to see the current setting. 4. Use the [-] [+] buttons to change the setting. Settings (Channel) OFF, 1–16 When set to “Off,” none of the data describing what you play on the keyboard will be transmitted. For details on connecting MIDI devices, refer to “Connecting to MIDI Devices” (p. 47). 5. Press the [Song] or [Metronome] button to leave Function mode. Sending Recorded Data to a MIDI Device (Composer MIDI Out) When Composer MIDI Out is “On,” you can send performance data recorded with the RP201 to a connected MIDI device or computer. 1. Hold down the [Song] button and press the [Metronome] button The display will indicate “Fnc” and you’ll be in Function mode. 2. Press and hold the [Others] button and use the [–] or [+] button to select “Out.” 3. Release the [Others] button to see the current setting. 4. Use the [–] [+] buttons to change the setting. Setting Explanation Performance data is transmitted. Performance data is not transmitted. 5. Press the [Song] or [Metronome] button to leave Function mode. Other Settings Using the V-LINK Function (V-LINK) Connecting the RP201 to a V-LINK compatible image device allows you to control the images with the RP201. 921 To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. V-LINK V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to connect two or more V-LINK compatible devices, you can easily enjoy a wide range of visual effects that are linked to the expressive elements of a music performance. Using V-LINK 1. Hold down the [Reverb] button and press the [Transpose] button. The display will indicate “_. _. _” and V-LINK will turn on. To turn VLINK off, hold down the [Reverb] button once again and press the [Transpose] button. If V-LINK is on, the bars at the bottom of the display will be lit. fig.d-VLinkOn.eps You can control images using the twelve keys at the left end of the keyboard. fig.V-LINK-Keyboard.eps While V-LINK is switched on, no sound is produced when you press any of the twelve keys at the left end of the keyboard. 2. To turn V-LINK off, once again hold down the [Reverb] button and press the [Transpose] button. Specifying the V-LINK Transmit Channel Here’s how to specify the channel on which messages will be sent to control images. 1. Hold down the [Song] button and press the [Metronome] button. The display will indicate “Fnc” and you’ll be in Function mode. fig.d-Fnc.eps 2. Press and hold the [Others] button and use the [–] or [+] button to select “vLn.” fig.d-vLn.eps 3. Release the [Others] button to see the current setting. 4. Use the [–] [+] buttons to set the desired MIDI channel . Settings (V-LINK Transmit Channel) 1–16 5. Press the [Song] or [Metronome] button to leave Function mode. Remembering the Settings (Memory Backup) Normally, the settings of the various variations will revert to their default values when the power is turned off. However, you can specify that the various settings will be remembered even when the power is turned off. This function is called “Memory Backup.” 1. Hold down the [Song] button and press the [Metronome] button. The display will indicate “Fnc” and you’ll be in Function mode. fig.d-Fnc.eps 2. Press and hold the [Others] button and use the [–] or [+] button to select “buP.” fig.d-buP.eps 3. When you take your finger off the [Others] button, the [ ] button will blink. 4. Press the [ ] button. The display will indicate “Sur,” and the [ ] button and [ ] button will blink. fig.d-Sur.eps If you decide not to save the settings, press the [ ] button. 5. To save the settings, press the [ ] button. The “buP” message flashes in the display. Never turn off the power while “buP” is blinking in the display. When the memory backup has been completed, the display will indicate “Fnc.” fig.d-Fnc.eps For details on the settings stored by the Memory Backup operation, refer to “Parameters Stored in Memory Backup” (p. 56). 6. Press the [Song] or [Metronome] button to leave Function mode. Restoring the Settings to the Factory Condition (Factory Reset) The settings you’ve changed in Function mode can be restored to their factory-set condition. This operation is called “Factory Reset.” Execute this operation if you want the settings you’ve stored using Memory Backup to be returned to their original state. When you execute “Factory Reset,” all settings you’ve stored up to that point will be cleared, and reset to their factory-set condition. Executing this operation will not erase the songs from internal memory. If you want to erase all songs from the RP201‘s internal memory, refer to “Deleting All ...