Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
With a setting of "DrylOO, Chorus 0," only the direct sound will be output. With a setting of "Dry 0, ChoruslOO," only the chorus sound will be output. [DELAY] Time (Delay Time) 0-500ms [6] Adjusts the time delay from when the direct sound begins until the delay sound is heard. Fb (Delay Feedback Level) -98%-+98% [7] Adjusts the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase. HF Damp (Delay HF Damp) 315Hz-8kHz/Bypass [8] Adjusts the frequency above which delayed sound fed back to the delay input will be cut. If you do not wish to cut the high frequencies of the feedback, set this parameter to Bypass. #Bal (Delay Balance) DrylOO, Delay 0-D 0, ChoruslOO [10] Adjusts the volume balance between the sound that's been routed through the delay versus that which hasn't. With a setting of "DrylOO, Delay 0", only the chorus sound will be output, and with a setting of "Dry 0, ChoruslOO," the chorus sound that's been routed through the delay will be output. [OUTPUT] Low Gain Adjusts the low frequency gain. High Gain Adjusts the high frequency gain. Output Level Adjusts the output level. -12-+12(dB) [17] -12-+12(dB) [18] 0-127(dB) [20] P-45: Flanger ► Delay [02H, OAH] This effect connects a flanger and a delay in series. L ■ SH Flanger Delay FLANGER-PELAY-OUTPUT [FLANGER] PreDly (Flanger Pre Delay) 0-100m(s) [1] Adjusts the time delay from when the direct sound begins until the flanger sound is heard. Rate (Flanger Rate) 0.05-10.0(Hz) [2] Adjusts the modulation speed of the flanger effect. Depth (Flanger Depth) 0-127 [3] Adjusts the modulation depth of the flanger effect. +Fb (Flanger Feedback Level) -98%-+98% [4] Adjusts the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase. Bal (Flanger Balance) DrylOO, Finger 0-Dry 0, Flnger100 [5] Adjusts the volume balance between the direct sound and the flanger sound. With a setting of "DrylOO, Finger 0," only the direct sound will be output. With a setting of Dry 0, FlngerlOO," only the flanger sound will be output. 74 Chapter 5. Applying Special Effects to the Sound (Multi-Effects) [DELAY] Time (Delay Time) 0-500ms [6] Adjusts the time delay from when the direct sound begins until the delay sound is heard. Fb (Delay Feedback Level) -98%-+98% [7] Adjusts the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase. HF Damp (Delay HF Damp) 315Hz-8kHz/Bypass [8] Adjusts the frequency above which delayed sound fed back to the delay input will be cut. If you do not wish to cut the high frequencies of the delay feedback, set this parameter to Bypass. #Bal (Delay Balance) Dry 100, Delay 0-Dry 0, Delay 100 [10] Adjusts the volume balance between the sound that's been routed through the delay versus that which hasn't. With a setting of "DrylOO, Delay 0," only the flanger sound will be output, and with a setting of "Dry 0, Delay 100," the flanger sound that's been routed through the delay will be output. [OUTPUT] Low Gain Adjusts the low frequency gain. High Gain Adjusts the high frequency gain. Output Level Adjusts the output level. -12-+12(dB) [17] -12-+12(dB) [18] 0-127 [20] P-46: Chorus ► Flanger [02H, OBH] This effect connects a chorus and a flanger in series. L ■ CHORUS-FLANGER-OUTPUT [CHORUS] PreDelay Time (Chorus Pre Delay) 0-100msec [1] Adjusts the time delay from when the direct sound begins until the chorus sound is heard. Rate (Chorus Rate) 0.05-10.0(Hz) [2] Adjusts the modulation speed of the chorus effect. Depth (Chorus Depth) 0-127 [3] Adjusts the modulation depth of the chorus effect. -i-Bal (Chorus Balance) Dry100, Chorus 0-Dry 0, Chorus100 [5] Adjusts the volume balance between the direct sound and the chorus sound. With a setting of "DrylOO, Chorus 0,'' only the direct sound will be output. With a setting of "Dry 0, ChoruslOO," only the chorus sound will be output. [FLANGER] PreDly (Flanger Pre Delay Time) 0-100m(s) [6] Adjusts the time delay from when the direct sound begins until the flanger sound is heard. Rate (Flanger Rate) 0.05-10.0(Hz) [7] Adjusts the modulation speed of the flanger effect. Depth (Flanger Depth) 0-127 [8] Adjusts the modulation depth of the flanger effect. Fb (Flanger Feedback Level) -98%-+98% [9] Adjusts the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase. #Bal (Flanger Balance) DrylOO, Finger 0-Dry 0, Flnger100 [10] Adjusts the volume balance between the sound that's been routed through the flanger versus that which hasn't. With a setting of "DrylOO, Finger 0", only the chorus sound will be output, and with a setting of "Dry' 0, FangerlOO," the chorus sound that's been routed through the flanger will be output. [OUTPUT] Low Gain Adjusts the low frequency gain. High Gain Adjusts the high frequency gain. Output Lev...