Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
* Recording begins from the start of the beat. Play. 3. Recording stops (after it stops, the sounds are loop played back). Press when the TEMPO indicator lights steadily Off Lit 4. Loop playback stops. Off Press when the TEMPO indicator lights steadily 2. Recording begins. Off Lit Hold down at least two seconds 1. Put the SL-20 in recording standby. Lit Blink Play. Operating the SL-20 Operating the SL-20 The PLAY indicator lights up; loop playback of the recorded phrase begins. * Pressing the TAP pedal during loop playback of a phrase causes the SL-20 to return the phrase to the beginning and play it back from that point. You can enjoy performing solos using recorded phrases as backing sounds. The volume level of the backing can be adjusted with the EFFECT LEVEL knob, while you can use the DIRECT LEVEL knob to adjust the volume of the solo performance. 4. Press the START/STOP pedal to stop loop playback. The PLAY indicator goes out. * Changing tempo by the SL-20 is not available while recording or loop playing back. * Recorded phrases cannot be permanently stored onboard the SL-20. Loop playback stops, and the recorded phrase is deleted. * You cannot change the tempo of the recorded phrases. * This feature does not permit overdubbing. 15 Operating the SL-20 Controlling Functions with an Expression Pedal You can connect an expression pedal (such as the Roland EV-5; optional) to the EXP jack and use the pedal to control a variety of functions. * With the Direct Level, Effect Level, Attack, and Duty functions, moving the pedal all the way back to the heel position sets the minimum value; moving the pedal all the way forward to the toe position sets the value to the current setting of the corresponding front-panel knob. * Set the minimum volume for the connected expression pedal to the “0” position. Setting the Function of the Expression Pedal 1. While holding down the TAP pedal, connect the expression pedal. The TAP indicator flashes. 2. After confirming that the TAP indicator has flashed, release the TAP pedal. 3. Select the desired expression pedal function with the PATTERN knob. 4. Press the TAP pedal. The TAP indicator flashes rapidly, and the setting is saved to the SL-20’s memory. * Be sure not to turn off the power while the TAP indicator is flashing rapidly. * This setting remains stored even after the power is turned off. * The factory default setting for the expression pedal function is Direct Level. Function Explanation Direct Level Controls the volume of the direct sound when the effect is on. Effect Level Controls the volume of the effect sound. Output Level Controls the output level when the effect is on. Attack Controls the volume of the attack. Duty Controls the duration of the sound. PATTERN Function 1 Direct Level 2 Effect Level 3 Output Level 4 Attack 5 Duty Hold Down Expression pedal (Roland EV-5, etc) Operating the SL-20 Operating the SL-20 When switching slice patterns, you can have...
Este manual também é adequado para os modelos :Instrumentos musicais - Audio Processor SL-20 (4.44 mb)