Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
* When this procedure is carried out on a memory card, the memory card’s backup area (refer to p. 48) is deleted at the same time. So, please check the data carefully before deleting. 1 2 3 4 1. Press [PATTERN SELECT], and confirm that the button has lit. “Ptn” appears in the display. * If already lit, there is no need to press the button. * Take care to note that if [PATTERN SELECT] is not lit, the SP-303 will then proceed with deletion of the sample (p. 34). 2. While holding down [CANCEL], press [DEL]. “dAL” (Delete ALL) appears in the display. [DEL] lights up, and the bank buttons blink. 3. Select the memory to be cleared. If deleting the patterns in the internal memory, press BANK [A] or [B]; if deleting the patterns on a memory card, press BANK [C] or [D]. When BANK [A] or [B] is pressed, both [A] and [B] light up. When BANK [C] or [D] is pressed, both [C] and [D] light up. [DEL] changes to a blinking light. * If no memory card is inserted, then pressing BANK [C] or [D] creates no response. * If you decide not to delete, press [CANCEL]. 4. Press [DEL]. [DEL] lights up, and the dots in the display blink. The deletion is complete when the dots stop blinking and remain off. Never turn off the power while the dots are blinking. This may result in corruption not only of the pattern currently being deleted, but may also damage other patterns, as well as the memory card. Changing the Assignment of Patterns to the Pads You can change the assignment of patterns to the pads by exchanging the patterns on two different pads. You can switch between a pad to which a pattern has already been recorded and a pad to which no pattern has been assigned. 2 1 3,4 5 3,4 1. Press [PATTERN SELECT], and confirm that the button has lit. “Ptn” appears in the display. * Take care to note that if [PATTERN SELECT] is not lit, the samples will then be switched (p. 34). 2. While holding down [DEL], press [REC]. [DEL] and [REC] light up, and “CHG” appears in the display. The pads to which the patterns are assigned then blink. 3. Press the BANK button and pad for one of the patterns to be exchanged. The pad lights up. 4. Press the BANK button and pad for the other pattern to be exchanged. The pad lights up, and [REC] blinks. 5. Press [REC]. [DEL] and [REC] light, and the dots in the display blink. The exchange is complete when the dots stop blinking and remain off. * If insufficient free space is available when exchanging patterns between the SP-303’s memory and a memory card, “FuL” is displayed, and the exchange cannot be carried out. Note that sufficient memory is needed particularly on the memory card. Never turn off the power while the dots are blinking. This may result in corruption not only of the patterns currently being exchanged, but may also damage other patterns as well as the memory card. Chapter 5 47 Chapter 6. Using Memory Cards Chapter 6. Using Memory Cards You can use commercially available SmartMedia cards as memory cards for the SP-303; The 3.3 V type with the capacities of 8 MB to 64 MB can be used. 1 MB, 2 MB, and 4 MB SmartMedia cards cannot be used. SmartMedia can be purchased at computer stores and vendors handling digital cameras. * For details on using SmartMedia, refer to the SmartMedia owner’s manual. Memory Cards In addition to the sixteen samples of Banks C and D and the sixteen patterns of Pattern Banks C and D, you can also store (save) up to seven sets of the SP-303’s own samples and patterns (from internal memory) in the backup area of a memory card. The memory in a card’s backup area is shared by Banks C and D and Pattern Banks C and D, so if a large amount of memory is used in saving data for a certain sample or pattern, that portion becomes unavailable for the other data. * Once this portion is used as a backup area, the possible sampling time will be correspondingly less. If you wish to use long samples, either re-format the card or purchase additional memory cards. * Saving extended samples in card memory reduces the backup area as well as the recording time available for patterns. (With the backup area using more memory) Sampling Pattern Backup Backup data data Area Area C1–D8 C1–D8 1 2 (With the sampling data using more memory) Sampling Pattern Backup data data Area C1–D8 C1–D8 1 * In some cases, a SmartMedia card which was used by the SP303 may no longer be usable by other SmartMedia-compatible devices. The procedures below cannot be carried out when there is no memory card inserted in the SP-303 or if the card is not formatted. • Recording and erasing of samples and patterns in Banks C and D • Playback, erasing, and exchanging of samples and patterns in Banks C and D • Saving and loading of samples and patterns In addition, if you attempt to carry out one of the following procedures with a write protect sticker affixed to the memory card, “Prt” appears in the display, and you are prevented for carrying out the operation (p. 51). • Recording and erasing of samples and patterns in Banks C and D • ...