Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
The volume balance between the subwoofers (SSW- 351) and full-range speakers (SST-151/251) and be adjusted with the power amp level settings. Using two power amps provides greater headroom when driving the speakers. If you wish to use an external channel divider (crossover network) instead of using the built-in crossover network, make connections to the DIRECT INPUT. Pay attention to the crossover frequency of each speaker that is connected. Carefully read the specifications before connecting an external channel divider (crossover network). For the crossover frequency, we recommend frequencies between 100 Hz and 200 Hz. 3. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA INTERNAL CROSSOVER PARALLEL INPUTS HIGH FREQ OUTPUT DIRECT INPUT FROM EXTERNAL CROSSOVER INPUT ONLY DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA PARALLEL INPUTS FULL RANGE SSW-351 SST-151/251 8 ohms 8 ohms Amplifier Amplifier Parallel input connection 4. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA INTERNAL CROSSOVER PARALLEL INPUTS HIGH FREQ OUTPUT DIRECT INPUT FROM EXTERNAL CROSSOVER INPUT ONLY DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA PARALLEL INPUTS FULL RANGE SSW-351 SST-151/251 8 ohms8 ohms Amplifier LOW Amplifier HIGH Channel Divider Crossover Network SSW-351 1. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA INTERNAL CROSSOVER PARALLEL INPUTS HIGH FREQ OUTPUT DIRECT INPUT FROM EXTERNAL CROSSOVER INPUT ONLY from the amplifier For superior quality in sound reproduction, we recommend the use of a reverse polarity cable for this connection. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA PARALLEL INPUTS FULL RANGE SSW-351 SST-151/251 2. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA INTERNAL CROSSOVER PARALLEL INPUTS HIGH FREQ OUTPUT DIRECT INPUT FROM EXTERNAL CROSSOVER INPUT ONLY from the amplifier DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA PARALLEL INPUTS FULL RANGE SSW-351 SST-151/251 The speakers can be driven by multiple amps very simply with the internal crossover network. When driving the speakers with two power amps (bi- amping), connect the speakers using the parallel input jacks. The volume balance between the subwoofers (SSW- 351) and full-range speakers (SST-151/251) and be adjusted with the power amp level settings. Using two power amps provides greater headroom when driving the speakers. If you wish to use an external channel divider (crossover network) instead of using the built-in crossover network, make connections to the DIRECT INPUT. Pay attention to the crossover frequency of each speaker that is connected. Carefully read the specifications before connecting an external channel divider (crossover network). For the crossover frequency, we recommend frequencies between 100 Hz and 200 Hz. 3. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA INTERNAL CROSSOVER PARALLEL INPUTS HIGH FREQ OUTPUT DIRECT INPUT FROM EXTERNAL CROSSOVER INPUT ONLY DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA PARALLEL INPUTS FULL RANGE SSW-351 SST-151/251 8 ohms 8 ohms Amplifier Amplifier Parallel input connection 4. DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA INTERNAL CROSSOVER PARALLEL INPUTS HIGH FREQ OUTPUT DIRECT INPUT FROM EXTERNAL CROSSOVER INPUT ONLY DESIGNED BY ROLAND AUDIO DEVELOPMENT CORP. IN CALIFORNIA, USA PARALLEL INPUTS FULL RANGE SSW-351 SST-151/251 8 ohms8 ohms Amplifier LOW Amplifier HIGH Channel Divider Crossover Network Setting Up the SSM-151 Setting Up the SSM-151 When used as a stage floor monitor, the SSM-151 can be set at two different floor angles. 55°35° When setting up monitor speakers, be sure to observe the following points in order to prevent the speakers from falling over (exercise caution particularly when using the 55degree setup, as the speakers may topple more easily in this orientation than when set up 35 degrees). * Do not sit or place feet on the speakers. * Do not place the speakers on unstable or inclined surfaces. * Do not use the speakers as steps. Specifications Model SST-151 SST-251 SSW-351 SSM-151 Enclosure Bass-reflex Bass-reflex Bass-reflex Bass-reflex Speakers 12" Woofer + Horn Tweeter 15" Woofer + Horn Tweeter 18" Woofer 12" Woofer + Horn Tweeter Power Handling (rated) *1 150 W 200 W 200 W 150 W (max) 450 W 600 W 600 W 450 W Frequency Response 58 Hz–16 kHz 52 Hz–20 kHz 45 Hz–1.5 kHz 58 Hz–16 kHz Nominal Impedance 8 ohms 8 ohms 8 ohms 8 ohms Sensitivity (1 W/1 m) 98 dB 100 dB 97 dB 98 dB Crossover Frequency 4 kHz 1.5 kHz 200 Hz 4 kHz Connectors (1/4" phone) Parallel Inputs x 2 Parallel Inputs x 2 Parallel Inputs x 2 Parallel Inputs x 2 Direct Input x 1 High Freq Output x 1 (Speakon® NL4MP) Parallel Input x 1 Parallel Input x 1 Parallel Input x 1 Parallel Input x 1 High Freq Output x 1 Weight 20 kg/44 lbs 31.8 kg/70 lbs 39.5 kg/87 lbs 14.5 kg/32 lbs Dimensions 407 x 407 x 642 mm 572 x 407 x 762 mm 572 x 559 x 838 mm 620 x 400 x...