Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Procedure 1. Press [STUDIO]-[F4 (AMBNCE)]-[F2 (GRPSND)]. The “AMBIENCE” page will appear. 2. Use [CURSOR] to move the cursor to the group for which you wish to make settings (“DRUMS”, “PERC”, “PART” ). 3. Use [INC/DEC] or the VALUE dial to make the setting. Parameters Ambience Group Send: 0–127 DRUMS: Adjusts ambience send level for the entire drum kit. PERC: Adjusts ambience send level for the entire percussion group. PART: Adjusts ambience send level for the sequencer parts (Part 1, Part 2, and Bass part). Chapter 89 Chapter 5. Control room settings The most important aspect of finalizing the sound in recording or live performances depends on the mixing console. In the Control Room, you’ll find a complete 12-channel mixer with 10 individual compressors and EQ’s and digital effects, finalizing your sound in a CD-quality state. Abbreviations in the display screen TRIGGER INPUT jacks K=Kick Sn=Snare T1=Tom 1 T2=Tom 2 T3=Tom 3 T4=Tom 4 HH=Hi-hat C1=Crash 1 C2=Crash 2 Rd=Ride cymbal A1=AUX1 A2=AUX2 Settings for each instrument The basic procedure In each page, strike the pad for which you wish to make settings, and the setting page for that pad will appear. You can also use [TRIG SELECT] to make your selection by. Adjusting volume (level) This adjusts the volume of each pad. Procedure 1. Press [CONTROL ROOM]-[F1 (MIXER)]-[F1 (VOLUME)]. The “VOLUME” page will appear. 2. Strike the pad that you wish to edit. The cursor will move to the slider of the pad that you struck. 3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make the setting. Parameters Volume: 0–127 Adjusting pan (stereo location) This adjusts the stereo location of each pad. Procedure 1. Press [CONTROL ROOM]-[F1 (MIXER)]-[F2 (PAN)]. The “PAN” page will appear. 2. Strike the pad that you wish to edit. The cursor will move to the slider of the pad that you struck. 3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make the setting. Raising the slider (pressing [INC]) will move the sound toward the right, and lowering it (pressing [DEC]) will move the sound toward the left. Parameters Pan: L15–Center–R15 Adjusting effect send level This sets the effect Send Level for each pad/sound. Procedure 1. Press [CONTROL ROOM]-[F4 (EFFECT)]-[F1 (FXSEND)]. The “EFFECT” page will appear. 2. Strike the pad that you wish to edit. The cursor will move to the slider of the pad that you struck. 3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make the setting. Parameters Send Level: 0–127 Chapter 5. Control room settings Selecting output assignments To change the output destination for the sound of each pad note that the vertical lines indicate the TRIGGER INPUT number, and the horizontal lines indicate the OUTPUT choices. The black dots indicate the OUTPUT assignment corresponding to each sound. Procedure 1. Press [CONTROL ROOM]-[F1 (MIXER)]-[F3 (OUTPUT)]. The “OUTPUT” page will appear. 2. Strike the pad that you wish to edit. The cursor will move to the vertical line (TRIGGER INPUT jack) of the pad that you struck. 3. Use the VALUE dial, [INC/DEC] or [CURSOR] to make the setting. Abbreviations in the display screen OUTPUT jacks M=MASTER 1=DIRECT 1 2=DIRECT 2 3=DIRECT 3 * The volume of the DIRECT 1, DIRECT 2 and DIRECT 3 jacks is not affected by the master volume control located in the upper right of the front panel ([MASTER]). Applications You can also use the DIRECT outputs (6) in mono by selecting (for example) DIRECT 1, and then panning the chosen sound hard right or left (R15/L15) (stereo location; p. 90). If you are processing all sounds externally, you can also use the MASTER out in this way, giving you 8 individual mono outs. Output Separation: 76 dB (min.) (MASTER L -> DIRECT L, MASTER R -> DIRECT R): 45 dB (min.) (DIRECT L -> Other DIRECT L, DIRECT R -> Other DIRECT R): 45 dB (min.) Controlling variations in volume (Compressor) 10 compressors are provided (Triggers 1-10 only) Compression is used to “smooth” volume peaks, preventing “overloads” and as it will also change the character and tone of the sound in response to the playing dynamics, it’s another useful tool in creating YOUR sound. Procedure 1. Press [CONTROL ROOM]-[F2 (COMP)]. The “COMPRESSOR/LIMITER” page will appear. 2. Strike the pad that you wish to edit. The setting page for the pad you struck will appear. 3. Use [CURSOR] to move the cursor to the parameter that you wish to set. 4. Use [INC/DEC] or the VALUE dial to make the setting. In this page, [F1] will turn the compressor on/off. Also, pressing the [F2][F3][F4] buttons will move the cursor directly to “Attack,” “Release,” or “Output.” Parameters ATTACK (Attack time): 0.05–50 msec Adjusts the volume of the attack (the beginning of the sound). RELEAS (Release time): 0.05–2000 msec Adjusts the release time of the sound. OUTPUT (Output Level): -60– +12 dB Adjusts the volume of the sound processed by the compressor. Ideally the volume should be about the same whether the compressor is on or off. Threshold (Threshold): -., -99–0 When the input exc...