Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. As shipped, the TU-12EX’s batteries are not yet installed. Be sure to read the section “Changing the Batteries,“ and then follow the instructions to install the batteries. Copyright © 2008 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. fig.01?????? To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Once the connections have been completed, turn on power to your guitar amp or other amplification system last. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. .. How to Use the Tuner (Normal Use–CHROMATIC Mode) 1. Connect the instrument to be tuned to the INPUT jack. If you're tuning an acoustic instrument, use the built-in mic instead. To use the mic, make sure that nothing is connected to the INPUT or OUTPUT jacks, and place the TU-12EX near the instrument. 2. Press [POWER] to switch the power on. 3. Press [CHROMATIC/GUITAR] to enable the “CHROMATIC” setting (lighting the green indicator). In CHROMATIC mode, the TU-12EX automatically displays note names and string numbers as you play them on your instrument. Most of the time, you'll find that CHROMATIC is the most convenient mode to use. If you're using a guitar or bass and wish to tune by specifying the string number first, use GUITAR mode. (Tuning using GUITAR mode is described in the next section.) 4. Play a single note on the instrument. Most of the time, you'll want to play an open string when tuning a guitar or bass. While the note is sounding, the note name and string number is displayed. The meter and Tuning Guide show how far the note is from the correct pitch. 5. Tune the instrument. While playing a single note, adjust the instrument's tuning as necessary to display the target note's name. Once the desired note name is displayed, fine-tune the note's pitch by tuning the instrument so that and on the Tuning Guide light simultaneously and the meter's needle points to 0 (the center position). When the Accu-Pitch feature is on, the tuner makes a beeping sound when the note is stabilized at the correct pitch, informing you that the note is in tune. .. How to Use the Tuner (GUITAR Mode) 1. Connect the instrument to be tuned to the INPUT jack. If you're tuning an acoustic instrument, use the built-in mic instead. To use the mic, make sure that nothing is connected to the INPUT or OUTPUT jacks, and place the TU-12EX near the instrument. 2. Press [POWER] to switch the power on. 3. Press [CHROMATIC/GUITAR] to enable the “GUITAR” setting (lighting the red indicator). 4. Press [ ] or [ ] to light the indicator for the string number you want to tune. 5. Play the selected string number on your instrument. Play the string open, without fretting it. 6. Tune the string. Adjust the string's tuning so that both and on the Tuning Guide are lit and the meter's needle points to 0 (the center position). When the Accu-Pitch feature is on, the tuner makes a beeping sound when the note is stabilized at the correct pitch, informing you that the note is in tune. 7. Repeat Steps 4-6 as necessary to tune the rest of your instrument's strings. .. TU-12EX Settings Changing the Reference Pitch for Tuning 1. Hold down [PITCH] and press [ ] or [ ] to choose the reference pitch you want. The indicator flashes. Choose the reference pitch you want by getting it to flash. 2. Release [PITCH] to set the selected reference pitch. Flat Tuning (Flat Feature) 1. Press [FLAT] to switch on the Flat feature (the red indicator lights). 2. Press [ ] or [ ] to set the number of flats (the number of flat semitones) that you wish to tune to. For example, if you select two flats, the actual pitch of a tuned note will be two semitones below what is displayed by the TU-12EX. 3. Press [FLAT] again. This enables the setting for the Flat feature. Even if you don’t press [FLAT], the setting is enabled automatically after three seconds. 4. To disable the Flat feature, press [FLAT] so that its red indicator goes out. Tuning While Listening to the Reference Tone (Sound Mode) 1. Choose the type of tuning you want to use (e.g., Tuning Mode, Flat feature). 2. Press [ ] (Sound) to play the reference tone. 3. Press [ ] or [ ] until the indicator for the note name/string number you want to tune is lit. The sound of the note name/string number shown by the indicator is played. 4. Tune the instrument to the reference tone. When you're using Sound mode, tuning cannot be performed using the built-in mic (the built-in mic is di...