Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
driver installation guide Preparations for installation Insert the included CD-ROM into your computer. Start up the driver installer. Choose [Start] — [My Computer] . Double-click “DVD/CD-ROM drive.” Double-click the DRIVER folder. Double-click the XP folder. Double-click the Setup icon. Click [Next] as instructed by the “Driver Setup” dialog box. The “Driver Setup” dialog box will appear. Click [Next] as directed in the screen. To begin the installation, click [Next] once again. If a dialog box regarding Windows logo testing appears, click [Continue Anyway]. The “Roland V-Synth GT Driver will be installed on your computer” dialog box will appear. This completes the preparations for installing the driver. 1 2 1. 2. 3. 4. 5. 3 1. 2. 3. Driver installation and connections Use a USB cable to connect the V-Synth GT to your computer. Switch off the power on the V-Synth GT. Use a USB cable to connect the V-Synth GT to your computer. Power up the V-Synth GT. Switch on the power on the V-Synth GT. The message “Found New Hardware” will appear near the taskbar, and then the “Found New Hardware Wizard” will appear. If the Found New Hardware Wizard asks whether you want to connect to Windows Update, choose “No, ...” and click [Next]. Choose the installation method. Choose “Install the software automatically (Recommended),” and click [Next] . If a dialog box regarding Windows logo testing appears, click [Continue Anyway]. Click [Finish] to complete the installation. Make sure that “Roland V-Synth GT” is displayed, and click [Finish] . In the “Driver Setup” dialog box, click [Close] . If the “System Settings Change” dialog box appears, click [Yes] . Restart Windows. This completes the driver installation. 1 1. 2. 2 1. 2. 3 1. 4 1. 2. 3. 4. Performance Options settings By making these settings you may be able to prevent clicks or pops in the sound. Be sure to make the settings as described below. Open the System Properties dialog box. Choose [Start] — [Control Panel] . The control panel will open. If the screen indicates “Pick a category,” click [Performance and Maintenance] . In “or pick a Control Panel icon,” click the [System] icon. MIDI OUT device Roland V-Synth GT MIDI IN device Roland V-Synth GT WAVE OUT device Roland V-Synth GT WAVE IN device Roland V-Synth GT This receives audio signals sent from the V-Synth GT to your computer. * ASIO device If you’re using the V-Synth GT with an ASIO-compatible application such as Cu- base, choose “Roland V-Synth GT” for the ASIO settings of your application. To prevent audio feedback loops or double monitoring, turn off monitoring in your application, or set things so ASIO Direct Monitoring is used. The V-Synth GT does not support ASIO Direct Monitoring. Support is emulated for your convenience. If you’re using the V-Synth GT with ASIO, we recommend that you make settings in your applica- tion so that the Microsoft GS Wavetable SW Synth is not used. (This is in order to decrease the processor load, and for convenience in changing the buffer size of the driver.) In Cubase SX, if the V-Synth GT’s sampling frequency is different than Cubase SX’s project setting, a message such as “Sample could not be set” may appear, and you will be unable to record or play back correctly. If this occurs, you can ensure correct operation by opening “Project Setup,” making sure that the sampling frequency matches, and clicking [OK]. * * * Open the Performance Options dialog box. Click the “Advanced” tab, and in the “Performance” area, click [Settings] . Enable “Background services.” Click the “Advanced” tab. In the “Processor scheduling” area, choose “Background services” and click [OK] . In the System Properties dialog box, click [OK] . This completes the performance options settings. 1 1. 2. 3. 2 1. 3 1. 2. 3. Preparations for installation Insert the included CD-ROM into your computer. Start up the installer driver. Choose [Start] — [Computer] . Double-click “DVD/CD-ROM drive.” Double-click the DRIVER folder. Double-click the Vista folder. Double-click the Setup icon. If a User Account Control screen appears, click [Continue]. If the screen indicates “Driver installation must be performed by an ad- ministrator,” you must log on to Windows as a user whose account type is Administrator, and perform the installation again. This completes the preparations for installing the driver. 1 2 1. 2. 3. 4. 5. 3 Driver installation and connections The screen will indicate “Roland V-Synth GT Driver will be installed on your computer.” Click [Next] . If a different message appears, proceed as directed by that message. To begin the installation, click [Next] . If a Windows Security dialog box appears, click [Install]. The screen will indicate “The V-Synth GT driver has been in- stalled.” If a different message appears, proceed as directed by that message. Use a USB cable to connect the V-Synth GT to your computer. Turn off the power on the V-Synth GT. Use a USB cable to connect the V-Synth GT to your computer. Tu...